毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

51单片机的心电信号采集处理系统+电路图+封装图

时间:2017-01-13 13:02来源:毕业论文
心电信号采集系统设计利用STC89C51单片机作为核心控制器,对经过放大、滤波等预处理后的心电信号进行A/D转换,再上传到上位机进行处理,在上位机则利用LabVIEW软件设计完成一套数据

摘要: 心电信号是人体最重要的生理信号之一, 其中含有大量信息,它主要是由于心肌收缩和舒张、瓣膜启闭、血流冲击心室壁和大动脉等因素引起的机械振动,包括关于心脏各个部分如心房、心室、大血管、心血管及各个瓣膜功能状态的各种病理信息,是心脏及大血管机械运动状况的反映,具有非线性、非平稳的特点。通过拾取该信号,可以用于判断特定的疾病信息。本设计利用STC89C51单片机作为核心控制器,对经过放大、滤波等预处理后的心电信号进行A/D转换,再上传到上位机进行处理,在上位机则利用LabVIEW软件设计完成一套数据采集、存储和回放为一体的虚拟监测平台,以便于我们分析和观测信号。5246
关键词: 心电信号;STC89C51单片机;LabVIEW
The ECG acquisition and processing system based on MCU
Abstract: The heart sound signal is one of the most important human physiological signal, which contains a large amount of information, it is mainly caused by mechanical vibration due to myocardial contractility and relaxation, the valve opening and closing, the impact of blood flow ventricular wall and the aorta and other factors, including information on heart various parts such as auricle, ventricular, vascular, cardiovascular and various valve functions state of various pathological information is the mechanical movement of the heart and great vessels reflect the nonlinear and non-stationary characteristics. By picking up the signal, we can analyze the specific disease. This design uses the MCU STC89C51 as the core controller, A / D conversion, amplification, filtering pretreatment the heart sound signal and then uploaded to the host computer for processing in the PC using LabVIEW software to design complete set of data acquisition, storage and playback as one virtual monitoring platform, so that we can analyze the observed signal.
KeyWords: the heart sound signal; MCU STC89C51; Lab VIEW
目录
1.    绪论.4
1.1    心电采集系统的发展背景及意义    4
1.2    心电采集系统的发展现状    4
1.2.1    便携式心电监测仪    5
1.2.2    无线心电监测仪    5
1.2.3    临床心电监测仪    5
1.3    心电采集系统的发展方向和未来展望    6
2.系统设计方案及论证7
2.1    心电采集系统的总设计要求    7
2.2    心电采集系统系统结构的设计    7
2.3 心电采集系统的可行性论证    9
3.硬件部分设计10
3.1    心电信号采集及电源部分的设计    10
3.2    前置放大电路部分的设计    11
3.2.1 AD620AN芯片简介    12
3.2.2 前置放大电路设计    13
3.2.3 元器件参数计算    14
3.2.4 补偿电路的设计    14
3.3    滤波电路部分的设计    15
3.4    增益控制放大电路部分的设计    17
3.5    A/D转换部分的设计    18
3.5.1 ADC0832芯片简介    18
3.5.2 A/D信号转换模块电路的设计    19
3.6    单片机模块部分的设计    20
3.6.1 STC89C51单片机介绍    20
3.6.2 单片机模块电路设计    23
3.7    USB接口部分的设计    24
3.7.1 PDIUSBD12芯片介绍    24
3.7.2 USB模块电路设计    26
4.电路仿真软件的应用及调试分析28 51单片机的心电信号采集处理系统+电路图+封装图:http://www.751com.cn/zidonghua/lunwen_2206.html
------分隔线----------------------------
推荐内容