毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89S51单片机红外测温仪的设计+电路图+程序

时间:2019-09-02 13:01来源:毕业论文
核心设备采用AT89S51单片机,红外热释传感器,温度传感器DS18B20。红外温度计是利用红外传感器的热辐射测量目标获取,通过红外传感器的转换电路将光信号转换成电信号,然后电信号通

摘  要:红外测温仪设计的主要目的是设计出一个可以快速测量环境和目标温度的智能设备,它主要由红外热释电传感器、温度传感器、放大电路、A / D转换电路、时钟电路、显示电路等部分。使用LM358放大器芯片、A / D转换芯片,核心设备采用AT89S51单片机,红外热释传感器,温度传感器DS18B20。红外温度计是利用红外传感器的热辐射测量目标获取,通过红外传感器的转换电路将光信号转换成电信号,然后电信号通过放大电路、A / D转换器等单元电路处理后送入单片机,单片机将带有数据信息的电信号处理,然后把电信号转化为温度大小显示输出。本设计可以在较短的时间内对目标和环境进行温度测量并通过显示屏进行显示。40435
毕业论文关键词:AT89S51;红外热释传感器;DS18B20;放大器LM358
The Design of the Infrared Thermometer
Abstract: The design of infrared thermometer is consisted of the design of pyroelectric infrared sensor, temperature transducer, amplification circuit, analog to digital converter, clock circuit and display circuit. The chips that are used in the design are LM358 amplifier chips and analog to digital converter chips. The design of key equipments adopts AT89S51 microcontroller, pyroelectric infrared sensor and DS18B20 temperature transducer.The infrared thermal radiation is captured by a detector, and a temperature transducer converts the radiant power to an electrical signal. Then the electrical signal will be processed by amplification circuit, analog to digital converter and then be sent to microcontroller. And the microcontroller will process the electric signal which can be displayed in units of temperature.
Keywords: AT89S51; Pyroelectric Infrared Sensor; DS18B20; Amplifier LM358 
目    录

摘要    1
引言    1
1.设计任务及方案    2
1.1设计任务    2
1.2设计方案    2
1.3系统工作流程图    3
1.4总体设计框图    3
2.系统测温的原理    3
3.器件选择    4
3.1 P7187热释电红外传感器    4
3.2 LM358放大器件    4
3.3温度传感器DS18B20    5
3.4 A/D转换器TLC549    6
3.5单片机AT89S51    7
3.6 显示器件LM016L    8
4.硬件设计    8
4.1系统原理图    8
4.2系统整体硬件电路    8
4.3复位电路设计    11
4.4上下限温度控制电路    11
4.5报警电路    12
4.6显示电路    13
4.7 DS18B20温度采集    14
4.8 P7187红外传感电路    14
5.软件设计    15
5.1主程序模块的设计    15
5.2红外测温程序模块    15
5.3键盘扫描程序模块    17
6.系统仿真    18
7.结束语    18
参考文献    18
致谢    23
红外测温仪的设计  引言         
温度与人们的生活密不可分,每天人们都需要感受环境的温度来确定今天需要穿多厚的衣服才能使人体感到舒适。我们也常常通过测量身体的温度来知晓自己是否感冒、发烧或者其他病症。迄今为止生活中的水银温度计最为常见,是测量温度的常见设备,它是基于材料如汞,遇热膨胀遇冷收缩,当所测温度值上升时,由水银温度计表面的刻度来读出高低温。尽管其使用方法方便,但仍有很大缺陷,如使用水银温度计时需要与皮肤的特定部位直接接触并且需要花很长的时间,以充分使温度计里的水银受热,测量结束时还会增加水银甩到低汞泡沫的一部分,由于汞的下部泡沫是由非常薄玻璃,很容易被损坏,而且由于汞这种物质在常温下容易气化,气化过程十分迅速不易察觉,因而我们日常生活中家用的玻璃水银温度计在有时仍不利于我们的身体健康。 AT89S51单片机红外测温仪的设计+电路图+程序:http://www.751com.cn/zidonghua/lunwen_38739.html
------分隔线----------------------------
推荐内容