毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C51单片机即热式电热水器控制系统的设计

时间:2017-06-03 16:56来源:毕业论文
基于 51 的即热式电热水器控制系统的设计和仿真,即根据即热式电热水器的基本原理电路,设计开发基于 C51的控制器,并对以前的电路进行了改进,编制相应的控制软件,实现新的简单

即热式电热水器是传统型电热水器的替代品,但是更实用、更安全、更方便、更节能。本文就是根据即热式电热水器的原理,完成基于 51 的即热式电热水器控制系统的设计和仿真,即根据即热式电热水器的基本原理电路,设计开发基于 C51的控制器,并对以前的电路进行了改进,编制相应的控制软件,实现新的简单,成本较低的即热式电热水器。本文首先介绍了即热式电热水器的原理,接着利用自顶向下的设计原理,根据设计要求对控制系统分为温度检测、按键输入、电源、LED 显示、蜂鸣报警和加热控制等模块。然后根据每个模块的功能对其原理分析,设计其硬件电路及每个模块的实现程序。最后完成整个控制系统的连接,并对其进行仿真调试,以研究其性能是否符合设计要求。 本文设计的即热式电热水器能够实现智能显示、功率控制、自动报警等功能,使用安全。  关键词 即热式电热水器 AT89C51 控制系统 Title  The Design of Control System of The Electric Tankless       9605
Water Heater                                          
Abstract
Electric Tankless Water Heater is a substitute of the traditional electric
water heater. But it is much more practical, safer, more convenient, and
more energy-efficient.  This article,  based on the principle of the  Electric
Tankless Water Heater, has completed the design and simulation of the
control system  on the  basis of  the AT89C51 MCU. According to the principle
of the  Electric Tankless  Water Heater, I  improved  the  previous  controller
circuit.  The corresponding control software is programmed  so as to design
a new, simple and lower cost water heater. At first, the article introduces
the principle of the Electric Tankless Water Heater. Then based on the
top-down approach, the control system is pided into  temperature
detection, key input, power supply, the LED display, buzzer  automatic.  Then
according to the function of each module, the hardware circuit and the
software are developed.  Finally the whole control system is connected. Then
I carried on the simulation test, to study whether the performance meet
the design requirement.
Keywords Electric Tankless Water Heater AT89C51 Control System
 目  次
 
1 引  言  1
1.1 选题的背景及意义    1
1.2 本文所作的工作    1
2 即热式电热水器概述  2
2.1 即热式电热水器的发展及现状    2
2.2 即热式电热水器的基本工作原理    3
2.3 系统总模块概述    4
3 系统硬件设计  5
3.1 核心芯片概述    5
3.1.1 芯片 AT89C51  .  5
3.1.2 双向可控硅.  8
3.2 系统硬件电路设计    9
3.2.1 加热控制电路  .  9
3.2.2 过零检测电路  10
3.2.3 温度检测电路  10
3.2.4 键盘和显示接口电路  11
3.2.5 报警电路  13
4 系统软件设计.  14
4.1 单片机 C51 语言概述  .  14
4.2 主程序  .  15
4.3 显示扫描子程序  .  16
4.4 按键扫描处理子程序  .  17
4.5 加热控制程序  .  18
4.6 温度检测程序  .  21
5 软件的调试与仿真.  23
5.1 仿真工具介绍  23
5.1.1 Keil μ Vision3 简介  23 AT89C51单片机即热式电热水器控制系统的设计:http://www.751com.cn/zidonghua/lunwen_8397.html
------分隔线----------------------------
推荐内容