毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

电厂站计算机联锁工程设计+CAD图纸

时间:2021-07-05 21:22来源:毕业论文
介绍了计算机联锁系统,包括系统的结构以及工作原理,其次介绍了本次电厂站计算机联锁工程设计所选用的DS6-60型系统,余下的部分是对本次设计的文字说明。本次毕业设计利用Auto

摘要在我国,计算机联锁系统是当前应用最广泛的联锁系统,和传统的电气集中联锁系统相比较,计算机联锁通过将通信技术、微机控制技术与铁路信号设计中的可靠性、安全性理论相结合,能更好的实现车站联锁控制功能。电厂站的设计选取了通号集团公司研究设计院研制的DS6-60型计算机联锁系统,联锁机采用了二乘二取二冗余结构,输入输出采用双系冗余配置,符合“故障-安全”原则。69191

本文首先介绍了计算机联锁系统,包括系统的结构以及工作原理,其次介绍了本次电厂站计算机联锁工程设计所选用的DS6-60型系统,余下的部分是对本次设计的文字说明。本次毕业设计利用AutoCAD进行工程设计,包括信号平面布置图、联锁表、双线轨道电路图、组合排列表、继电接口电路、驱采电路以及配线表。

该论文有图40幅,参考文献21篇。

毕业论文关键词:计算机联锁  电厂站  故障-安全  AutoCAD

Computer Interlocking Design for Dianchang Station

Abstract

  Computer interlocking system is the most widely used interlocking system in our country.Compared with the traditional electric interlocking system, through combining the communication technology, computer control technology and the reliability, security theory of railway signal design ,the interlocking computer can better realize the function of station interlocking control . The design of Dianchang Station selected the DS6-60 type of computer interlocking system developed by the Research and Design Institute of CRSC Corporation. The interlock machine uses the Double 2-Vote-2 redundant structure and the I/O uses the dual redundancy configuration, which reached the requirements of failure- Safety .

  This paper introduced the computer interlocking system firstly,including the structure and principle of the system, then introduced the DS6-60 system which is used in the engineering design of Dianchang Station. The remaining is the instruction of the design.The graduation design using AutoCAD for engineering design, including the layout of signal, interlocking table, layout of track circuit, listing table of combination,circuit of relay interface , circuit of drive&collection and wiring table. 

  This paper contain 40 illustrations and 21 references.

Key Words: computer interlocking  Dianchang Station  fault- Safety  AutoCAD

                     

                     目   录 

摘要 I

Abstract II

目录 III

图清单 V

1 绪论 1

1.1 计算机联锁系统概述 1

1.2工程设计 4

1.3设计主要内容 4

2 DS6-60型计算机联锁系统概述 5

2.1 DS6-60型计算机联锁的系统结构 5

2.2 DS6-60计算机联锁系统的特点 6

3 车站平面信号布置图 7

3.1车站概述 7

3.2信号平面布置图绘制 7

4 联锁表的编制 12

4.1方向栏 12

4.2进路栏 12

4.3进路方式栏 电厂站计算机联锁工程设计+CAD图纸:http://www.751com.cn/zidonghua/lunwen_77955.html

------分隔线----------------------------
推荐内容