毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AdvanTrol-Pro小型火电厂的集散控制系统设计

时间:2019-10-06 16:20来源:毕业论文
用AE2000过程控制实验装置模拟小型火电厂,应用中控ECS-100系统和组态软件AdvanTrol-Pro 2.5完成对小型火电厂的集散控制系统设计,详细阐述了AE2000过程控制实验装置

摘要随着现代化工业的发展,工业生产的规模和复杂度不断扩大,对其生产过程的控制是保证工业生产顺利进行的关键,集散控制系统目前是主流的控制系统。本文用AE2000过程控制实验装置模拟小型火电厂,应用中控ECS-100系统和组态软件AdvanTrol-Pro 2.5完成对小型火电厂的集散控制系统设计,详细阐述了AE2000过程控制实验装置、ECS-100系统硬件和通信网络以及系统组态设计过程,并应用PID调节器对系统的温度、液位和流量进行检测与控制,包括单回路控制、串级控制以及比值控制等控制方案。通过对PID参数的合理整定,对系统温度、液位和流量的控制效果好,系统响应速度快,稳定性强。18823
关键词  集散控制系统  火电厂  过程控制  组态
 毕业设计说明书(毕业论文)外文摘要
Title    The Design of Distributed Control System for Small Thermal Power Plant                       
Abstract
With the development of modern industry, the size and complexity of industrial production continues to expand. Control of industrial production processes is the key to ensuring the smooth conduct of industrial production. Distributed Control System Control System is now mainstream control systems. In this paper, AE2000 process control device simulated small thermal power plants. We will complete the design of distributed control systems for small thermal power plants  by SUPCON ECS-100 system and configuration software AdvanTrol-Pro 2.5. We detection and control temperature, level and flow of the system by PID regulator, including single-loop control scheme control, cascade control and ratio control. The control effect is good by tuning PID parameters reasonable, and the system response speed and stability.
Keywords  DCS  Thermal power plants  Process Control   Configuration
目   次
1  引言    1
2  小型火电厂模拟装置:AE 2000    2
2.1  装置简介    2
2.2  装置组成结构    2
2.3  检测装置工作原理    3
3  ECS-100系统硬件    5
3.1  ECS-100 系统简介    5
3.2  通信网络    6
3.3  控制站硬件    8
3.4  操作站硬件    15
4  系统组态设计    16
4.1  组态软件AdvanTrol-Pro 2.5    16
4.2  控制站组态    17
4.3  操作站组态    21
5  温度、液位、流量检测与控制    24
5.1  PID调节器    24
5.2  温度控制    24
5.3  液位控制    27
5.4  流量控制    32
5.5  实验小结    40
结论    41
致谢    42
参考文献    43
1  引言
随着科技的不断进步,现代化工业的发展突飞猛进,规模越来越大,同时复杂程度也不断加深,其生产过程控制与管理显得至关重要。在这种背景下,集散控制系统(DCS: Distributed Control System)应运而生。它以微处理器为基础,融合计算机(Computer)技术、测量控制(Control)技术、网络通信(Communication)技术、显示与人机界面(CRT)技术即“4C”技术而成的现代控制系统[1]。
DCS系统主要特征之一是分散控制,源于它的控制对象分散;另一个特点是集中管理,利用计算机技术集中监视和控制管理生产过程。目前的DCS功能强大、可靠性高、操作方便,高度集成化、信息化、开放化。DCS的强大决定了它的应用广泛,在工业化过程控制中首屈一指,涉足于电力、化工、石油、冶金、造纸等各行各业[2]。尤其在火力发电行业,DCS奠定了火电厂现代化与自动化的基础。 AdvanTrol-Pro小型火电厂的集散控制系统设计:http://www.751com.cn/zidonghua/lunwen_40369.html
------分隔线----------------------------
推荐内容