毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

Matlab新型矩阵式变换器的分析与设计

时间:2018-04-25 21:12来源:毕业论文
介绍了矩阵式变换器的发展背景与发展历程,并且对于直接矩阵式变换器的电路拓扑、控制方案、换流策略进行详细地分章节的分析与讨论。之后选取了优化过后的调制矩阵法进行深入

摘要近几年,矩阵变换器在实际应用中起到的作用越来越大,因为它能够满足提供可调幅、调频的输出电压的功能,同时输入功率因素高,并且具备较高频率调节范围、传输效率高、噪音频率高于可听音频范围等显著优点,将有可能代替传统的逆变器结构。最为让科研人员感兴趣的是三相输入、三相输出拓扑形式的矩阵式变换器。矩阵式变换器的开关是可以在四象限运行,由于现有工艺条件不能制造出一种直接可以满足四象限运行的开关,因此只能通过两个二象限电压开关反向并联,或者通过两个二象限电流开关反向串联的形式来实现。研究人员对于矩阵式变换器的深入研究主要集中在以下的两个方面:矩阵式变换器双向开关的实现和矩阵式变换器的控制策略。
    本文简单介绍了矩阵式变换器的发展背景与发展历程,并且对于直接矩阵式变换器的电路拓扑、控制方案、换流策略进行详细地分章节的分析与讨论。之后选取了优化过后的调制矩阵法进行深入研究,并使用Matlab7.0软件给予仿真验证其变频、变压功能。21828
关键字  矩阵变换器;控制策略;换流;仿真
毕业论文设计说明书(论文)外文摘要
Title   The Research and Design of New Matrix Converter                   
Abstract
In the last few years,The matrix converter offers an“all silicon”solution for AC/AC conversion,removing the need for reactive energy storage
components used in conventional rectifier-inverter based systems.People are most interested in is the three-phase input ,three-phase output of matrix converter.Matrix converter is a four quadrant switch,and since there is no existing four quadrant switch, so only through two quadrant voltage switch in parallel, or two quadrant current switch in series to implement.The further study of matrix converter are mainly concentrated in two aspects: the realization of the matrix converter two-way switch and control strategy of matrix converter.
This paper briefly describes the background and development process of the development of matrix converter, and for the direct matrix converter circuit topology, the control scheme, commutation strategy detailed analysis and discussion of the chapter. After selecting the modulation matrix method optimized after thorough research and use Matlab7.0 simulation software to give its frequency, PSA function.
Keywords  Matrix converter ; Control policy;  Commutation ;Simulation
目次
1  引言    1
1.1  矩阵变换器技术的发展背景    1
1.2  矩阵式变换器的特点和分类    2
1.3  开展矩阵式变换器研究的意义    6
2  矩阵式变换器的基本工作原理    8
2.1  矩阵式变换器的几种最基本的拓扑    8
2.2  矩阵式变换器的双向开关构成    9
2.3  矩阵式变换器的其他变换功能    10
3  矩阵式变换器的控制策略    13
3.1  直接传递函数法(Venturini法)    13
3.2  优化AV方法    15
3.3  空间矢量调制策略    17
4  矩阵式变换器的换流方法    19
4.1  双向开关换流控制的基本原理    19
4.2  基于输出电流方向检测的多步换流策略    20
4.3  基于换流电压检测的换流策略    24
5  基于Matlab的仿真研究    27
5.1  关于Matlab仿真软件    27
5.2  对于三相输入-三相输出拓扑形式的矩阵式变换器的仿真    27 Matlab新型矩阵式变换器的分析与设计:http://www.751com.cn/zidonghua/lunwen_14216.html
------分隔线----------------------------
推荐内容