毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

单片机高速公路感应式照明控制系统设计+源程序

时间:2018-09-29 17:29来源:毕业论文
通过对现有照明系统的分析对比,以高速公路夜间行车安全性的分析为出发点,设计出一个能够解决行车安全问题,同时又能兼顾节能的智能照明控制系统,为解决上述矛盾提供一个可

摘要社会的高速发展带动交通运输的快速发展,高速公路现已覆盖全国各地,四通八达的高速公路为社会作出一系列贡献的同时,也带来了一系列的问题。其中由高速公路的发展引发的对于高速公路行车安全的关注即是其中之一,而夜间行车安全问题尤为严重,但出于对能耗方面的考虑,一般高速公路均不设置路灯。而本文旨在设计一种适用于高速公路的感应式照明控制系统,以解决这个矛盾。28683
本文旨在通过对现有照明系统的分析对比,以高速公路夜间行车安全性的分析为出发点,设计出一个能够解决行车安全问题,同时又能兼顾节能的智能照明控制系统,为解决上述矛盾提供一个可行方案。
本系统采用现场总线控制,结合单片机与红外感应设备,通过检测车辆来去,控制路灯的明灭,实现“车来灯亮,车走灯灭”的目标。
关键词  高速公路  感应式  照明控制 
毕业论文设计说明书外文摘要
Title    Design of Induction Lighting Control System for Highway   
Abstract
The rapid development of the society drives the rapid development of transportation,highways are now covered throughout the country,but when the highway made a series of contributions to the society ,at the same time, it also brings a series of problems。One of them is the attention of the highway driving safety caused by the development of the highway. At night, the problem of driving safety is particularly serious. But for the consideration of energy consumption,general highway does not set up street lamps.This paper is to design an inductive lighting control system for highway.To resolve this problem.
Through the analysis and comparison of the existing lighting system,with starting point of the analysis of the highway driving safety at night.Design a intelligent lighting control system which can solve the problem of driving safety and can take into account the energy saving.To provide a feasible solution for the above contradiction.
The system uses field bus control,combined microcontroller and infrared sensor equipment,through the detection of the vehicle to control the lights,realize the goal of"The car come,lingts on,The car come,lights off".
Keywords    highway   induction   lighting control
 目  次
1  绪论    1
1.1  课题背景    1
1.2  课题目的    1
1.3  高速公路照明现状分析    2
2  高速公路夜间行车安全分析    4
2.1  高速公路事故分析    4
2.2  高速公路事故原因分析    4
3  高速公路感应式照明控制系统需求分析    6
4  高速公路感应式照明控制系统总体设计    7
4.1  路灯的设置    7
4.2  灯具的选择    7
4.3  感应方式的选择    8
4.4  控制方式的选择    8
4.5  系统工作原理    9
5  高速公路感应式照明控制系统软硬件设计    12
5.1  软件设计    12
5.2  硬件设计    12
6  系统设计仿真    14
6.1  单辆车通过时系统仿真结果    14
6.2  多辆车经过时系统仿真结果    17
6.3  系统功能(仿真结果)分析    20
7  对于高速公路感应式照明控制系统的展望    21
7.1  高速公路感应式照明控制系统的意义    21
7.2  高速公路感应式照明控制系统的不足    21 单片机高速公路感应式照明控制系统设计+源程序:http://www.751com.cn/zidonghua/lunwen_23633.html
------分隔线----------------------------
推荐内容