毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

Matlab异步电机电压空间矢量控制系统的仿真与数字实现

时间:2018-08-08 20:56来源:毕业论文
以研究改善异步电机控制性能的方法为目的,采用电压空间矢量脉宽调制的算法,分别进行了仿真与数字化实现

摘要能源问题的出现,让我们对电机控制有了进一步的要求。随着科技的发展,尤其是交流调速相关技术的发展,使得先进的控制策略得以实现。这篇论文以研究改善异步电机控制性能的方法为目的,采用电压空间矢量脉宽调制的算法,分别进行了仿真与数字化实现。其中,采用Matlab软件建模仿真时结合矢量控制策略,而利用Code Composer Studio软件进行C语言编程时主要是在微处理器上实现开环的SVPWM算法。仿真与实验结果验证了本算法的可行性与正确性,并且体现了电压空间矢量调制的优点,如动态跟随性好,电流谐波、转矩波动小等,对实际控制有一定的参考意义。26780
关键词  矢量控制 电压空间矢量 仿真 数字化实现
毕业论文设计说明书外文摘要
Title  Simulation and Digital Realization of Asynchronous Motor with SVPWM Control System   
Abstract
The emergence of energy problems is the reason for our further requirements for the motor control. With the development of science and technology, especially those related to AC speed regulation, the advanced control strategies can be realized. This thesis aims to study the methods of improving the performance of asynchronous motor control and conducts simulation and digital realization respectively using the space vector pulse width modulation algorithm. Among them, in the use of modeling and simulation at Matlab, it combines vector control strategy while in the use of C programming at Code Composer Studio software, it mainly realize open-loop SVPWM algorithm in microprocessor. The simulation and experimental results verify the feasibility and correctness of the algorithm and embody the advantages of voltage space vector modulation, for instance, good dynamic tracking, small current harmonic and torque ripple etc. and have certain referential significance to the actual control.
Keywords  vector control  voltage space vector  simulation   digital realization
目   次
1  引言    1
1.1  研究背景及意义    1
1.2  交流调速发展情况    1
1.3  国内外研究现状    3
1.4  本章总结    3
1.5  论文的内容和结构安排    4
2  矢量控制方式    5
2.1  异步电机数学模型和坐标变换    5
2.2  矢量控制思想    8
2.3  本章小结    10
3  空间矢量脉宽调制方式    11
3.1  脉宽调制方式比较    11
3.2  SVPWM主要原理    11
3.3  SVPWM实现思想    16
3.4  本章小结    22
4  异步电机SVPWM控制的仿真    23
4.1  Matlab软件介绍    23
4.2  具体模块搭建    23
4.3  仿真结果分析    31
4.4  本章小结    34
5  异步电机SVPWM控制的数字实现    36
5.1  DSP软件介绍    36
5.2  主程序与中断程序    36
5.3  具体程序设计    38
5.4  结果分析    41
5.5  本章小结    43
结  论    44
致  谢    45
参考文献46
1  引言
1.1  研究背景及意义
电能的广泛应用代表了科学技术的进步与发展,大量使用电能的同时难免会面对浪费能源的问题。而在这个注重工业发展的时代,电能的主要消耗者是随处可见的电动机,而其的主要功用是将电能转换为机械能。因而要想解决电能的能源危机,从电动机着手是很有必要的,需要利用先进的技术手段,寻求节约电能的有效途径[1]。 Matlab异步电机电压空间矢量控制系统的仿真与数字实现:http://www.751com.cn/zidonghua/lunwen_21054.html
------分隔线----------------------------
推荐内容