毕业论文

打赏
当前位置: 毕业论文 > 医学论文 >

内酯常温开环聚合催化剂的合成

时间:2020-03-24 21:00来源:毕业论文
采用红外、核磁等技术对磷酸酯催化剂的结构进行了表征;并研究了自制催化剂对开环聚合反应速率及组成的影响

摘要本文以P2O5和脂肪醇为原料,合成了自制的磷酸酯催化剂,并以mPEG为引发剂,将自制的催化剂用于内酯的开环聚合反应,同时,采用红外、核磁等技术对磷酸酯催化剂的结构进行了表征;并研究了自制催化剂对开环聚合反应速率及组成的影响。结果表明:1)自制的月桂醇磷酸酯催化剂以磷酸单酯为主,且随月桂醇投料比的增加,双酯含量逐渐增加,而异丙醇磷酸酯则以双酯为主;2)自制磷酸酯催化剂的效能均高于传统的辛酸亚锡催化剂,磷酸单酯的催化效率优于磷酸双酯;3)内酯开环聚合产物的结构应为磷酸基-聚内酯-mPEG,以磷酸单酯为主。除主反应产物外,产物中还含有游离磷酸和己内酯开环生成的6-羟基己酸。46952

In this paper, P2O5 and fatty alcohol as raw materials, the synthesis of the homemade phosphate catalyst, and the mPEG as the initiator, the homemade catalyst used in lactone ring opening polymerization, at the same time, using infrared, nuclear magnetic technology had been used to characterize the structure of phosphate catalyst; And studied the homemade catalyst of polymerization reaction rate and the influence of split ring. The results showed that: 1) homemade lauryl phosphate catalyst is given priority to with phosphoric acid monoester, and with the increase of the dosing raio lauryl alcohol, double ester content increased gradually, and isopropyl alcohol phosphate is given priority to with double ester; 2) homemade phosphate catalyst efficiency were higher than the traditional stannous octylic acid catalyst, the catalytic efficiency of phosphate monoester is better than that of double phosphate ester; 3) lactone ring opening polymerization product structure should be followed phosphate group (lactone, mPEG, give priority to with phosphate monoester. In addition to the main reaction products, product also contains the free phosphoric acid and caprolactone huansheng into 6 - hydroxy caproic acid.

毕业论文关键词:常温;开环聚合;内酯;催化剂

Keyword: normal temperature; The ring opening polymerization; Lactone; catalyst 

 目    录

1 引言 4

1.1 内酯开环聚合的应用 4

1.2 开环聚合催化剂的应用 5

2 实验部分 6

2.1 试剂和仪器 6

2.2 实验方法 7

2.3 测试方法 7

3 结果与讨论 9

3.1 磷酸酯催化剂合成物的结构表征 9

3.2 催化效率比较 11

3.3 聚合产物结构表征 12

4 结论 14

5 参考文献 15

1 引言

随着社会的发展,化学材料对社会有着越来越大的影响。一方面,由于化学材料对人类的巨大贡献,人们对它也就形成了越来越大的依赖;另一方面,化学材料的大量使用也使人们越来越重视如何更好的使用化学材料。近年来,由于高聚物的高效应用,通过内酯开环聚合来合成高聚物的反应越来越受到人们的重视。许多研究小组对其产生了浓厚的兴趣。因此,内酯开环聚合已经发展成为一个广泛应用于化学、药学、生命科学和农学等学科领域的重要研究方向,同时也成为一个具有重大理论意义和应用前景的前沿技术。

1.1内酯开环的应用

脂肪族聚酯及其共聚物作为生物医学材料中的一类,尤其是PCL,引起了人们越来越大的重视。PCL有着很好的渗透性以及相容性,这使它非常适合用作药物控制释放材料[1]。但聚己内酯的疏水性、降解速度慢等性质限制了它的应用。而通过引入亲水基团可以对它进行改性,从而拓宽其应用。脂肪族聚酯在防污涂料方面也有应用,Fay等[2]就对其进行了研究,在一定的条件下进行开环共聚反应,反应完成后分析发现其制备的共聚物在芳香族溶剂中有较好的溶解性。 内酯常温开环聚合催化剂的合成:http://www.751com.cn/yixue/lunwen_48846.html

------分隔线----------------------------
推荐内容