毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

多接口多信道网络的设计与仿真

时间:2021-01-31 15:54来源:毕业论文
随着无线网络的发展,研究如何提高网络吞吐量具有重要意义。对现有的单接口单信道网络通信方案和多信道多接口网络通信方案进行深入的研究

摘要随着无线网络的发展,研究如何提高网络吞吐量具有重要意义。对现有的单接口单信道网络通信方案和多信道多接口网络通信方案进行深入的研究,并完成了以下工作:

(1)分析目前多信道多接口网络的研究进展。63005

(2)在NS2平台上设计了有线、无线网络融合的场景。

(3)设计了多接口多信道的网络模型,并进行仿真分析。

(4)编写脚本分析仿真产生的数据文件,并绘制成图形,然后与单接口单信道网络的性能进行对比。

仿真结果表明,有线、无线网络的融合效果比较理想。比起传统网络的单接口方案,多接口多信道方案极大的提升了网络的吞吐量。

毕业论文关键词  通信工程  无线网络  网络融合   NS2    多接口多信道

毕业设计说明书(论文)外文摘要

Title    The Design and Simulation of The Multi-interface Multi-channel Network        

Abstract With the development of wireless networks, how to increase the throughput of network has become a problem to be solved. There is now commonly accepted that the presence of multi-interface enabled devices is going to be very likely in the near future. After checking out a great deal of information, and researching on the inside and outside current development of network, I have done the following things:

Analysis the achievement of the  multi-channel multi-interface network 's research. Design the integration of wired and wireless networks. According to Ramon’s scheme ,a method to modify the basic units of the wireless node is provided and it is endbled to support the multi-channel and multi-interface. As the most often used software for network simulation,such as NS2.Finally simulating the multi-channel multi-interface network with NS2.The simulation results show that the multi-channel multi-interface network is successfully designed.

Keywords  communications engineering  wireless networks  Network Convergence NS2  Multi-channel multi-interface

1 引言 1

1.1 研究意义 1

1.2 多接口多信道(MCMI)网络的研究现状 1

1.3 论文的主要内容及章节安排 3

2 多接口多信道网络技术及仿真平台介绍 4

2.1 多信道多接口网络技术 4

2.2 NS2仿真平台介绍 6

2.3 本章小结 10

3 系统的设计与实现 11

3.1 多接口多信道网络的设计与实现 11

3.2 有线无线网络融合的设计与实现 17

3.3 本章小结 18

4 仿真和分析 19

4.1 有线无线网络的融合仿真分析 19

4.2 多接口多信道网络的仿真分析 22

4.3 本章小结 27

结论 28

致谢 29

参考文献 30

 1 引言

1.1 研究意义

随着无线通信技术的提高以及无线网络应用成本的降低,无线网络的使用更加便捷、经济,无线上网逐渐被人们接受。然而随着无线网络的快速发展,网络的带宽加速耗尽,现有的网络吞吐量已经不能满足无线网络的发展要求,这一点已经成为该领域急需解决的问题。当今无线网络主流的通信方案仍然采用单接口单信道方式,这种方案没有充分利用现有的频谱资源,因而并不能从本质上提高网络吞吐量,而多接口多信道技术则很好的解决了此类问题。此外,该方案不仅能成倍提升吞吐量,而且在减少丢包率和延时抖动方面的表现也较之前的单接口技术更为突出。 多接口多信道网络的设计与仿真:http://www.751com.cn/tongxin/lunwen_69370.html

------分隔线----------------------------
推荐内容