毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

毫米波固态功放线性化技术研究仿真

时间:2017-02-27 18:54来源:毕业论文
列举当前流行的功率放大器的线性化方法,比较总结各自的优缺点。在对毫米波功率放大器的特性和非线性失真问题充分研究的基础上,着重讨论基于肖特基二极管的模拟预失真技术

摘要随着通信频谱资源的日益紧张,毫米波技术受到越来越多的关注,而功率放大器是射频收发机中非线性失真最严重的器件之一。本课题列举当前流行的功率放大器的线性化方法,比较总结各自的优缺点。在对毫米波功率放大器的特性和非线性失真问题充分研究的基础上,着重讨论基于肖特基二极管的模拟预失真技术,在中频模块产生预失真信号,然后上变频到Ka频段,最终实现毫米波功率放大器的线性化。通过在ADS微波仿真软件中建立固态功放单元的大信号非线性仿真模型,在软件仿真平台中将功放与预失真器一起协同仿真。
关键词  毫米波功率放大器 线性化 预失真 肖特基二极管 ADS微波仿真软件
毕业设计说明书(论文)外文摘要
Title    Study on linearization technology for milimeter-wave solid state power amplifier     
Abstract With the the fact that communication spectrum resource is becoming increasingly scarce, millimeter wave technology gets more and more attention, However power amplifier is one of the most serious devices that cause nonlinear distortion in the RF transceiver. This paper lists the current power amplifier linearization method, summarized and compared their respective advantages and disadvantages. After a fully study on the characteristics and nonlinear distortion of the millimeter-wave power amplifier, my study focused on the analog pre-distortion technology based on Schottky diode, in this technology a pre-distortion signal was generated in the intermediate frequency module, then converted to Ka band by up-conversion, eventually realizing millimeter wave power amplifier linearization. By building a power amplifier unit of large signal nonlinear simulation model in the microwave simulation software of ADS, power amplifier and a pre-distorter was simulated together on this software simulation platform.
Keywords  Millimeter-wave power amplifier   Linearize   Pre-distortion Schottky diode   Simulation software of ADS
目   次
1  引言    1
1.1  线性功率放大器研究的背景及意义    1
1.2  国内外发展状况和未来的发展趋势    1
1.3  本文内容安排和主要研究成果    3
2  功率放大器非线性的理论分析    5
2.1  功率放大器非线性失真产生的原因    5
2.2  功率放大器非线性模型    6
2.3  功率放大器非线性指标    7
2.4  本章小结    12
3  功率放大器的主要线性化技术    13
3.1  功率回退法    13
3.2  反馈法    13
3.3  前馈法    16
3.4  LINC法    17
3.5  EE&R法    18
3.6  预失真法    19
3.7  本章小结    22
4  二极管预失真器基本原理    23
4.1  二极管的预失真器实例    23
4.2  二极管的预失真器原理分析    25
4.3  本章小结    27
5  基于模拟预失真技术的毫米波线性化固态功放的设计与仿真    28
5.1  总体设计方案    28
5.2  基于肖特基二极管的预失真器设计    29
5.3  辅助模块原理说明    34
5.4  Ka波段线性化固态功放系统仿真    38
5.5  本章小结    40
结  论    41
致  谢    42
参 考 文 献    43 毫米波固态功放线性化技术研究仿真:http://www.751com.cn/tongxin/lunwen_3515.html
------分隔线----------------------------
推荐内容