毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

ARM嵌入式系统的数据采集传输系统研究+源程序

时间:2017-02-07 21:33来源:毕业论文
论文给出了基于ARM嵌入式系统数据采集、传输的硬件原理图和相应的数据采集、通信传输控制软件的程序设计。嵌入式系统的应用提高了系统的可靠性,并实现了数据的高速采集与传输

摘要随着科学技术的飞速发展,人们对数据采集的要求越来越高。嵌入式系统是当今最流行的前沿技术之一。将嵌入式技术引入数据采集系统,可大大提高系统的实时性和灵活性,满足日益提高的测量需求。本文的研究正是基于ARM的嵌入式数据采集系统。该系统采用UCB1400中的A/D转换器进行数据采集,并进行模数转换。经过ARM处理器进行处理,由UART异步串行口传输到外设,完成系统设计目标。本论文给出了基于ARM嵌入式系统数据采集、传输的硬件原理图和相应的数据采集、通信传输控制软件的程序设计。嵌入式系统的应用提高了系统的可靠性,并实现了数据的高速采集与传输。5562
关键词   嵌入式系统  数据采集传输  ARM  UCB1400  UART
毕业设计说明书(论文)外文摘要
Title  The research of data acquisition and transmission system based on ARM embedded system  
Abstract
With the rapid development of technology,the demands on data acquisition are enhanced. Embedded system is one of the leading-edge technologies nowadays,It can be used to enhance real-time feature and flexibility of system,so as to meet the increasing measurement needs.The study of embedded data acquisition system based on ARM is such a case.
The system uses A/D converter chip UCB1400 collect data, transforming the analog signal into digital signal and processing through the ARM processor. Finally,the date will be transferred to the peripheral through the UART interface using protocol RS-232 and the purpose of the system design will be achieved. This paper gives the hardware schematics of the data acquisition and transmission system based on ARM embedded system and the program of data acquisition and communication transmission control software.
Keywords  Embedded System  Data acquisition and transmission  ARM UCB1400  UART
目   次

1    绪论 1
1.1    数据采集传输系统的发展历程和方向 1
1.2    嵌入式系统简介 2
1.3    ARM简介 3
1.4    本文研究内容4
2    系统硬件设计 5
2.1    总体设计5
2.2    SEP3203微处理器5
2.3    UCB14006
2.4    定时器模块10
2.5    INTC中断控制器15
2.6    UART通用异步收发器18
3    系统软件设计25
3.1    仿真环境25
3.2    A/D模数转换设计27
3.3    串口软件设计31
 结论 33
 致谢 34
 参考文献35
 附录A 36
 附录B 42

 1  绪论
随着科学技术的飞速发展,人们对数据采集的要求越来越高。在实现高实时、高精度、高速度的同时还要求采集设备智能化、网络化和便携化,并具有友好的人机界面。由于资源极度受限,传统的8/16位单片机难以满足上述要求;而ISA或PCI数据采集卡,则存在着安装麻烦、价格昂贵且电磁兼容性差等缺点[1]。嵌入式系统是当今最流行的前沿技术之一。将嵌入式系统引入数据采集系统,可大大提高系统的实时性和灵活性,满足日益提高的测量需求。
1.1  数据采集传输系统的发展历程和方向
1.1.1   发展历程
数据采集传输系统是自动化系统的关键部分。它起始于20世纪50年代,1965年美国首先研究了用在军事上的测试系统,目标是测试中不依靠相关的测试文件,由非熟练人员进行操作,并且测试任务是由测试设备高速自动控制完成的。由于该种数据采集传输系统具有高速性和一定的灵活性,可以满足众多传统方法不能完成的数据采集和传输任务,因而得到了初步的认可。 ARM嵌入式系统的数据采集传输系统研究+源程序:http://www.751com.cn/tongxin/lunwen_2633.html
------分隔线----------------------------
推荐内容