毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

基于白光LED的室内可见光通信系统发射端电路设计仿真

时间:2017-02-07 21:23来源:毕业论文
论文按照自顶向下的原则,首先对系统结构进行了分析,然后在对白光LED的伏安特性、光谱特性等深入分析的基础上,重点研究了白光LED的发射端电路的设计,然后选取了OOK调制编码方

摘要可见光通信技术是一种在白光LED发明及应用后发展起来的新兴无线光通信技术。在可见光通信系统中,LED不仅提供室内照明,还可以应用到无线光通信系统中进行信息交换,发射端电路以及调制编码方式是系统的基础和核心。论文主要对基于白光LED的可见光通信系统发射端电路及编码方式进行了设计。
本论文按照自顶向下的原则,首先对系统结构进行了分析,然后在对白光LED的伏安特性、光谱特性等深入分析的基础上,重点研究了白光LED的发射端电路的设计,然后选取了OOK调制编码方式进行了可行性论证,通过使用system view软件仿真,得到结论:OOK调制编码在低速传输时能很好的进行可见光通信。
关键词  室内可见光通信  白光LED  发射端电路  OOK调制编码
毕业设计说明书(论文)外文摘要
Title     Design of transmitter circuit based on white LED      
indoor visible light communication system        
Abstract
Visible light communication technology is an emerging wireless optical communication technology developed after the invention and application of the white LED. In the visible light communication system, the LED can not only provide interior lighting, but also can be applied to the wireless optical communication system for the exchange of information, while transmit-side circuit and modulation encoding mode are the basis and core of the system. The thesis is mainly focused on the research of transmitter circuit and encoding mode of the visible light communication system based on the white LED.
In accordance with the superincumbent principle, the thesis analyzed the structure of the system firstly. Secondly, on the basis of analysis of the volt-ampere and the spectral characteristics of the white LED, its transmitter circuit was designed. Finally, it was carried out that a feasibility study of the OOK modulation encoding mode and the conclusion was drown that the OOK modulation coding mode can do pretty well in visible light communication in low-speed transmission by using system view to simulate.
Keywords  Indoor Visible Light Communication  White LED  transmit-side circuit  OOK modulation    
目   次
1    绪论    1
1.1  LED可见光无线通信的发展概要    1
1.2  可见光通信与射频、红外通信的比较    4
1.3  本文主要研究的内容    5
2    白光LED的原理、结构与工作特性研究    7
2.1  LED发光原理    7
2.2  白光LED的实现    7
2.3  白光LED的物理特性和发光特性    11
3    室内LED无线通信系统发射端电路设计    15
3.1  可见光通信系统结构    15
3.2  VLC系统发射端电路设计    18
4    室内可见光通信OOK调制方式研究    22
4. 1    OOK调制编码    22
4. 2    OOK信道编码性能分析    28
结 论    30
致  谢    31
参 考 文 献    32
1    绪论
20世纪90年代后期,随着全光接入技术的发展和人们对高速无线宽带通信的要求,一种信息容量大和部署灵活、文护方便、安全保密的无线光通信技术,得到了人们的极大关注,它为无线宽带接入的快速部署提供一种灵活的解决方案,其应用范围已从军用和航天领域迈入民用领域。
近几年来,半导体(LED)照明技术发展迅猛,利用半导体(LED)器件高速点灭的发光响应特性,将信号调制到LED可见光上进行传输,使可见光通信与LED照明相结合构建出LED照明和通信两用灯,为光通信提供一种全新的宽带接入方式[1]。无线LED光通信是以大气作为传输媒质来进行光信号传送的,只需在收发端之间存在无遮挡的视距路径和足够的光发射功率。 基于白光LED的室内可见光通信系统发射端电路设计仿真:http://www.751com.cn/tongxin/lunwen_2629.html
------分隔线----------------------------
推荐内容