毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

FPGA控制DDS的频率发生器设计

时间:2018-08-21 14:22来源:毕业论文
学习FPGA和硬件语言VHDL基础上,利用已有的电路板,写出了DDS的各个模块,并将其在电路板上调试通过。获得所需要的频率。并结合硬件电路对信号进行了D\A转换、滤波处理、放大处理

摘要直接数字频率合成(DDS)是指采用数字合成技术利用单一或多个高稳定度、高精度信号,通过一定的运算产生高精度及稳定度的输出频率的合成技术。如今,直接数字频率合成(DDS)技术广泛用于电子设备和系统工程中,可满足测试、实验需要。本文在讨论了频率合成技术的背景、发展及其实现方法的基础上,以正弦波产生机理为理论基础,详细阐述了DDS频率合成技术的原理与应用方法,并对FPGA控制DDS频率发生器的实现方法进行研究,编写了基于FPGA的DDS模块程序并通过调试得到所需中波段频率。27280
在广泛地研究了已有硬件电路实现方案及电路设计之后,结合本系统的设计要求,在学习FPGA和硬件语言VHDL基础上,利用已有的电路板,写出了DDS的各个模块,并将其在电路板上调试通过。获得所需要的频率。并结合硬件电路对信号进行了D\A转换、滤波处理、放大处理。
关键词  DDS  频率发生器  FPGA   中波段
毕业论文设计说明书外文摘要
Title    DDS  Frequency Generator controlled by FPGA                  
Abstract
Direct Digital Synthesis (DDS) is the process of generating discrete frequency by single or multiple signal sources with high accuracy and stability by a linear calculation in the frequency domain. The generated signal has equal high accuracy and stability with the signal sources. Direct digital frequency synthesis generator is the circuit that can be used to realize the DDS process. Today, the direct digital frequency synthesis technology is widely used in electronic devices and systems to meet the test and the experimental needs. In this paper, the principle of the direct digital frequency synthesis technology is served as the basis for developing FPGA implementation method to control the DDS frequency generator. The VHDL FPGA program of DDS module is compiled as a result.
Through extensively study of the hardware circuit and circuit design, basic on the design requirements of the system and FPGA, the DDS program is made and is debugging on the circuit board. The desired frequency can be generated and it is filtered and amplified by hardware circuits.
 Keywords  DDS  Frequency Generator  FPGA  Medium Wave Band
目   次
1引言1
  1.1任意频率发生器背景与意义1
  1.2频率发生器的实现方法1
  1.3频率合成技术的应用2
  1.4直接数学合成技术的实现方法及方案论证2
  2直接数字频率合成器的原理及性能4
  2.1频率合成技术的性能比较4
  2.2DDS结构与基本原理4
  3基于FPGA的DDS模块实现11
  3.1基本结构框架11
  3.2同步寄存器11
  3.3加法器12
  3.4波形ROM存储器12
  3.5合并17
4系统调试19
  4.1外围电路19
  4.2系统工作平台20
  4.3系统调试21
  结论25
致谢26
参考文献27
1  引言
1.1  任意频率发生器背景及其意义
频率合成是指由一个或多个频率稳定度和精确度很高的参考信号源通过频率域的线性运算,产生具有同样稳定度和精确度的大量离散频率的过程;频率发生器是电子系统中重要的组成部分,可以用来实现频率的合成[1]。过去传统的频率发生器电路结构较为复杂,实际调试难度较大,且由分立元件或模拟集成电路构成,这种频率发生器只能产生几种常规波形。任意频率发生器的产生是为了满足实际生产科研中实验和测试需求,需要其能够产生复杂的、任意的、有规律的波形如正弦波、方波、三角波。 FPGA控制DDS的频率发生器设计:http://www.751com.cn/tongxin/lunwen_21740.html
------分隔线----------------------------
推荐内容