毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

AT89C51单片机白光LED路灯照明控制器设计

时间:2018-07-05 11:36来源:毕业论文
选用AT89C51作为控制器,通过单片机送出不同的转换数据至数模转换器MCP4822来调节驱动器上的BRT端的输入电压,最后实现对串联白光LED亮度的调节。同时,系统中设置了三个按键,分别为

摘要现在,白光LED作为国际公认的下一代照明源,已经被广泛应用于手机、液晶屏等产品中。由于白光LED是由电流驱动的器件,其发光强度与流过LED的电流成正比。因此,通过对流过白光LED电流的调节,可以实现对背光源的亮度实现调节。25216
本设计将运用单片机控制白光LED路灯照明的控制器,实现对10个串联白色LED灯亮度进行调节。
在本设计中,选用MAX1554型号的升压型变换器芯片,该芯片具有电源升压变换及调节LED电流的功能,可以满足系统的设计要求。
系统选用AT89C51作为控制器,通过单片机送出不同的转换数据至数模转换器MCP4822来调节驱动器上的BRT端的输入电压,最后实现对串联白光LED亮度的调节。同时,系统中设置了三个按键,分别为开锁键,亮度增强键和亮度减弱键,用于对键盘的锁定和白光LED亮度的调节。
关键词:AT89C51 MAX1554 MCP4822
毕业论文设计说明书(论文)外文摘要
Title:Design of White LED street lamp lighting control
Abstract
Now, the white LED as the next generation lighting source internationally recognized has been widely used in mobile phone, LED screen and other products.As the white LED is driven by the current, the luminous intensity and flow through the currents proportional to LED.Therefore, through the regulation of the flow through the white LED current, can realize the brightness of back light source to achieve the regulation.
This design will introduce a single-chip microcomputer control through the design of white LED lamp lighting controller, realize regulation example on 10 series of white LED lamp brightness.
In this design, the selection of a model for the boost type MAX1554 converter chip, the chip has a power boost transformation and functional regulation of LED current, can meet the requirements of system design.
The system chooses AT89C51 as the controller, to adjust the input voltage of BRT end by conversion single chip send the different data to a digital to analog converter MCP4822, finally realizes regulating the series white LED brightness.At the same time, the system set up three buttons, respectively, the unlock button, brightness enhancement of keys and the brightness down, used for adjusting a keyboard lock and white LED brightness.
KEYWORD:AT89C51 MAX1554 MCP4822
 目   次
1  绪论.1
1.1  课题研究的背景及意义.1
1.2  路灯照明控制器的概述与现状.1
1.3  课题研究的主要任务.1
1.4  论文总体安排.2
    1.4.1  白光LED路灯控制器设计.2
    1.4.2  系统设计要求及设计思路.2
2  白光LED路灯照明控制器的硬件介绍.3
2.1  AT89C51单片机简介3
2.1.1  AT89C51单片机特性概述3
2.1.2  AT89C51单片机引脚介绍3
2.2  MCP4822D/A转换器简介5
2.2.1  MCP4822D/A转换器内部结构.6
2.2.2  MCP4822D/A转换器引脚功能.6
2.2.3  MCP4822D/A转换器工作原理7
2.3  LED驱动器MAX1544简介.8
2.3.1  LED驱动器MAX1544引脚功能.9
2.3.2  LED驱动器MAX1544工作原理.10
3  硬件电路设计.11
3.1  主电路与MCP4822模块11
3.2  MAX1554模块.11
软件开发流程及代码分析.14
4.1  系统软件程序14
    4.1.1  系统主程序流程图14
    4.1.2  定时器0中断服务程序流程图15
4.2  系统软件代码分析16
4.2.1  函数声明及变量定义16
4.2.2  Main():主程序17
    4.2.3  Send():MCP4822D/A转换子程序.18
4.2.4  按键处理程序19
4.2.5  其他子程序22
5  系统测试分析.25 AT89C51单片机白光LED路灯照明控制器设计:http://www.751com.cn/tongxin/lunwen_18880.html
------分隔线----------------------------
推荐内容