毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

Solidworks基于图像的钻头质量检测系统设计+CAD图纸

时间:2019-10-26 14:50来源:毕业论文
基于视觉技术的中小型钻头刃面的自动光学检测方法的分析设计,系统的总体方案设计,机械结构设计,驱动控制设计,大致的后期数据处理方法。钻头的直径范围在1mm~5mm,要求精度为

摘要:在钻孔操作中,钻头的质量好坏将直接影响和决定钻孔的质量,从而影响产品的质量和生产成本,因此,需要对新钻头和使用后研磨的钻头的刃面形状进行检测,从而保证产品加工的质量。本课题的任务是设计能够完成对中小型钻头刃面形状的自动检测。要求对自动光学检测方法和技术应用的研究现状进行分析研究,确定系统的总体方案,进行检测系统和机械结构系统的分析设计并绘制出结构图。本论文的主要内容是基于视觉技术的中小型钻头刃面的自动光学检测方法的分析设计,系统的总体方案设计,机械结构设计,驱动控制设计,大致的后期数据处理方法。钻头的直径范围在1mm~5mm,要求精度为10um。本文最主要针对机械部分设计进行分析,并对光学的检测系统进行简要说明。41376
在机械设计部分设计夹具模块,并对各个零部件的所受弯矩进行校核,选择符合使用要求及使用寿命的硬件,并在检测系统的软件设计上进行简要文字说明,配合图片将检测系统的软件部分清楚地表达出来。
毕业论文关键字: 机器视觉,钻头质量,光学检测
Design of bit quality inspection system based on image
Description
In the drilling operation, the quality of drill will directly affect and determine the drilling quality, thus affecting the product quality and production cost. Therefore, it is necessary to detection of new drill and after grinding drill surface shape, so as to ensure the quality of processed products. The task of this project is to design the automatic detection system to determine the shape of the cutting edge of the middle and small size drills. The research status of automatic optical inspection method and technology is analyzed and studied, the overall scheme of the system is determined, the analysis and design of detection system and mechanical structure system are analyzed and the structure diagram is drawn. The main content of this thesis is based on visual technology in small drill bit blade surface of the automatic optical detection methods of analysis and design, the overall design of the system, mechanical structure design, drive control design, general post data processing method. The diameter of the drill is in the range of 1mm~5mm, and the accuracy is 10um. In this paper, the most important part of the design of mechanical analysis, and the optical detection system is briefly described.
    Key words: Machine Version, Drill Quality, Optical Inspection                     
目录
1.    绪论    6
1.1.    课题背景与意义    6
1.2.AOI的各项技术及应用    7
1.2.1.概述    7
1.2.2.AOI的关键技术    8
1.2.3.光源技术    8
1.2.4.成像技术    8
1.2.5.高速图像预处理技术    9
1.2.6.图像处理及图形识别算法    9
1.3.国内外、检测系统的发展概况    9
1.4.课题任务和设计    10
2.    总体设计方案    10
2.1.系统工作原理    10
2.2.系统总体机构设计    10
2.3.检测系统的主要性能参数    11
2.4.检测流程    11
3.    机械结构设计计算    12
3.1.水平方向机构设计计算    12
3.1.1.概述    12
3.2.竖直方向机构设计计算    14
3.2.1.概述    14
3.2.2.竖直电机选择    14
3.2.3.竖直直线导轨的选择    15 Solidworks基于图像的钻头质量检测系统设计+CAD图纸:http://www.751com.cn/jixie/lunwen_41404.html
------分隔线----------------------------
推荐内容