毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

Wlison1MW风力机叶片设计+CAD图纸

时间:2018-11-11 13:19来源:毕业论文
设计了1MW的风力发电机叶片,内容包括了计算外形结构和尺寸数据,选择叶片翼型和材料等。在计算数据时,选择了Wlison设计模型,并使用了MATHLAB工具来进行叶片外形数据的优化设计

摘要:风力机叶片是风力发电系统中重要的部件之一。风力机叶片直接影响风力发电机的功率,效率和尺寸等。本课题设计了1MW的风力发电机叶片,内容包括了计算外形结构和尺寸数据,选择叶片翼型和材料等。在计算数据时,选择了Wlison设计模型,并使用了MATHLAB工具来进行叶片外形数据的优化设计。在实际运行的情况下,还要考虑如何预防雷击对叶片造成的伤害,因为叶片是风力发电系统中最昂贵的部分。叶片总体长30米,翼型选用了N4415型,叶片是用玻璃钢制造,结构稳固,设计风速12m/s,转速约24r/min,总体风能利用系数约30%。30108
毕业论文关键词:  风力机叶片;MATHLAB;Wlison设计模型;玻璃钢;防雷系统
Design of the Wind Turbine Blade
Abstract:    Wind turbine blades is one of the important parts of wind power system, which is a direct impact on wind generator power, efficiency and size. This project is designed to 1MW wind turbine blades, including the calculation of the shape and size of the data structure, select the blade airfoil and materials. In calculating the data, select the Wlison design model and use the MATHLAB to optimize the design blade profile data. In the case of the actual operation, but also consider how to prevent harm caused by lightning leaves, design lightning protection system, because the blades wind power system is the most expensive part. 30 m overall length blade airfoil selected N4415 type blade is made by FRP, structural stability, the design wind speed 12m / s, the speed of about 24r / min, the overall power coefficient of about 30%.
Keywords:    Wind Turbine Blades; MATHLAB; Wlison design model; FRP; lightning protection system for wind turbine blades
目录
摘要:    i
Abstract:    i
1    绪论    1
1.1    风力发电机    1
1.2    风力发电机结构    2
1.3    风力发电机的发展趋势    4
1.4    国内外研究现状与水平    6
1.5    风力发电机叶片    8
2    风力发电机叶片设计计算    9
2.1    风力机特征风速确定    9
2.1.1    特征风速的推导与确定    9
2.2    叶片外形设计    10
2.2.1    叶片基本参数    10
2.2.2    翼型及其升阻比    10
2.2.3    风轮直径    11
2.3    叶展形状设计模型    13
2.3.1    三个参考设计模型    13
2.3.2    Wlison设计模型    15
2.4    风力机叶片设计计算程序    16
2.4.1    Wlison优化设计方法和数学模型    16
2.4.2    Wilson 优化设计步骤    17
2.5    计算过程    17
2.5.1    基础数据计算    17
2.5.2    MATHLAB程序设计    18
2.5.3    绘制三文图形    20
3    风力机叶片材料    22
3.1    选材目的    22
3.2    玻璃钢    22
3.3    玻璃钢特点    23
4    防雷系统设计    24
4.1    叶片遭雷击统计    24
4.2    叶片损坏现象和机理    24 Wlison1MW风力机叶片设计+CAD图纸:http://www.751com.cn/jixie/lunwen_25648.html
------分隔线----------------------------
推荐内容