毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

NX行李箱盖外板加强板修边模设计+CAD图纸

时间:2020-10-14 20:35来源:毕业论文
利用西门子UG NX软件中的关于汽车模具的Die Design进行一些相关的设计,准确的反映出了模具之间的装配关系,可以检验模具结构的可行性,产品是否合理,减少在实际操作过程中的一些

摘要:随着人们的生活水平逐渐上升,人们所追求的生活品质也是日益递增,汽车作为人们日常生活的必需品,人们对他的需求越来越大。如何设计出一款生产效率高,又能满足大众要求的车是当下一个重要的问题。在设计制造一款汽车时,我们一定要先设计出他的模具,因为模具是做出汽车部件的一个必须品,只有做出好的模具,我们才能做出好的汽车。本文以汽车行李箱外板加强板修边模设计为实例,分析其成形特点并利用修边模的设计原则,确定冲压方向、工艺补充面、凸模轮廓线以及料片线等设计方法。本设计本设计利用西门子UG NX软件中的关于汽车模具的Die Design进行一些相关的设计,准确的反映出了模具之间的装配关系,可以检验模具结构的可行性,产品是否合理,减少在实际操作过程中的一些问题,同时还调用了UGNX软件自带的标准件库,避免标准件重复建模,从而提升了模具设计的质量,缩短了模具设计时间同时保证了模具的质量。57948

毕业论文关键词:汽车覆盖件;修边模;冲裁;NX;效率,行李箱外板加强板

Die Design for Luggage compartment lid Reinforcing plate Based on NX

Abstract: Nowadays, people’s living standard is improving day by day and people pursue standard higher and higher. As a necessary tool, the car demand is increasing. How can we design and manufacture the car with high efficiency is a question that has been probing. In automobile manufacturing, mold design is a very important step; many parts of the car are in mold production. Based on the former in the back automobile floor beam drawing die design as an example, analyzes its forming characteristics and using the drawing die design principle. In this design, Siemens industry software production will be used in die design for its digital design with high efficiency. It can be seen the assembly relation very clearly so that it is very convenient to check whether there is dry mold parts structure involves and reasonable. With NX software, it will be reduced the actual time and some of the problems of mold design. At the moment, there is a reuse library in NX, all of standard part in it can be reused so it can avoids to repeating modeling standard parts, so as to improve the mold design efficiency and quality.

Key words: Automotive covering parts; Die Design; UGNX; luggage compartment lid reinforcing plate

目  录

1  绪论  1

1.1  汽车覆盖件模具1

1.1.1  汽车覆盖件特点 1

1.1.2  汽车覆盖件结构和形状 1

1.1.3  汽车覆盖件的刚性要求1

1.1.4  汽车覆盖件的表面质量要求2

1.1.5  汽车覆盖件的工艺性2

1.2  汽车覆盖件模具发展现状 2

1.2.1  汽车覆盖件的产能不断扩大 2

1.2.2  汽车覆盖件的技术进步加快 3

1.2.3  汽车覆盖件的联盟趋于形成 3

1.2.4  汽车覆盖件的产能不断扩大 3

1.3  基于NX的汽车覆盖件模具设计4

1.3.1  汽车覆盖件的技术进步较快 4

1.3.2  本课题的研究意义 4

2  产品结构及其工艺性分析 6

2.1  零件的工艺性分析6

2.2  材料成型性能分析6

2.3  工艺方的案确定7

2.4  冲压方的向确定7

2.5  压料板的设计8

3  行李箱盖外板加强板设计 10

3.1  修边模具的结构确定10

3.2  修边凸模的设计10

3.2.1  修边凸模的结构确定10

3.2.2  修边凸模的尺寸设计11

3.2.3  修边凸模的固定方式11

3.2.4  修边凸模的材料选用以及技术要求12 NX行李箱盖外板加强板修边模设计+CAD图纸:http://www.751com.cn/jixie/lunwen_62824.html

------分隔线----------------------------
推荐内容