毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

CCS可再生燃料电池的电极制备+文献综述

时间:2018-03-30 17:58来源:毕业论文
论文利用CCS(Catalyst Coated on Substrate)即传统的气体扩散层(单层)电极制备方法制备可再生燃料电池的电极,进行对于电极催化剂和耐腐蚀扩散层的研究

摘要:可再生燃料电池是一种安全可靠的可再生能源,不久的将来会渐渐代替一次能源。而电极则是电池中的核心部分,因此,如何简单并且有效的方法制备可再生燃料电池的电极成为了主要的研究方向。本毕业论文利用CCS(Catalyst Coated on Substrate)即传统的气体扩散层(单层)电极制备方法制备可再生燃料电池的电极,进行对于电极催化剂和耐腐蚀扩散层的研究,最终得到了氧电极催化剂中Pt与IrO2的质量比为4:6,耐腐蚀扩散层中碳铵与IrO2 质量比为1:1为电极的最佳用量,而氢电极中最佳的催化剂为40%Pt/C。这样制得的电极不但大大降低了成本,还增加了电极的寿命。20381
关键词:可再生燃料电池;制备;电极催化剂;耐腐蚀扩散层
The preparation of electrode for unitized regenerative fuel cell
Abstract:,The unitized regenerative fuel cell is a safe and reliable renewable energy. It will replace the primary energy in the future. Therefore, finding a simple and effective method of preparation for unitized regenerative fuel electrode has become the main research direction. This paper use CCS (Catalyst Coated on Substrate) is the traditional gas diffusion layer (single) electrode preparation method to prepare unitized regenerative fuel cell electrode, corrosion-resistive gas diffusion layer in the electrode Catalyst and research, finally gets oxygen electrode Catalyst Pt and IrO2 mass ratio of 4:6, corrosion-resistive gas diffusion layer and NH4HCO3 IrO2 mass ratio of 1:1 for the best dosage of electrodes, and the best Catalyst for 40% of the hydrogen electrode Pt/C. Such of electrode not only greatly reduces the cost, but also increases the life span of the electrode.
Keyword: unitized regenerative fuel cell; preparation; electrode catalyst;corrosion-resistive gas diffusion layer
目录
1 绪论    1
1.1可再生燃料电池的简介    1
  1.1.1可再生燃料电池的分类    1
1.2研究发展可再生燃料电池的意义    1
1.3可再生燃料电池的应用    2
1.3.1航天领域的应用    2
1.3.2电网领域的应用    3
1.3.2汽车领域的应用    4
1.4可再生燃料电池的主要技术问题    3
1.5可再生燃料电池电极的作用及制备    4
1.5.1可再生燃料电池电极的作用    4
1.5.2可再生燃料电池电极的制备    5
 1.5.2.1 CCS气体扩散层电极制备    5
 1.5.2.2 CCM膜电极制备    5
 1.5.2.3薄催化层电极制备    5
 1.5.2.4复合催化层电极制备    5
2立题依据及意义    5
3实验部分    6
3.1实验试剂    6
3.2实验仪器    6
3.3实验方法    7
3.3.1可再生燃料电池氢电极的制备    7
3.3.2 可再生燃料电池氧电极的制备    7
 3.3.2.1 憎水化碳纸制备    7
 3.3.2.2 耐腐蚀扩散层制备    7
 3.3.2.3 氧电极催化剂制备    7
 3.3.3 可再生燃料电池的热压工艺    7
3.4 可再生燃料电池电极对于电池的性能研究    7
3.4.1氢电极催化剂对于电池性能研究    8
3.4.2氧电极催化剂用量对于电池性能研究    8
3.4.3氧电极扩散层的耐腐蚀性研究    8
3.4.4耐腐蚀扩散层中的发孔剂对于电池性能研究    8
4实验数据与讨论    9
4.1氢电极催化剂对于电池性能研究    9 CCS可再生燃料电池的电极制备+文献综述:http://www.751com.cn/huaxue/lunwen_12142.html
------分隔线----------------------------
推荐内容