毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

张家港市二级城市道路(惠阳路)设计

时间:2020-08-01 10:53来源:毕业论文
关于张家港市二级城市道路设计为题的毕业设计。 本次惠阳路设计路段桩号为K0+000 - K3+187.654区间, 道路长3187.654米,设计时速为50km/h,路基宽度为25.5m。 主要设计内容内容如下: 1、路

摘要 本次毕业设计是关于张家港市二级城市道路设计为题的毕业设计。 本次惠阳路设计路段桩号为K0+000 - K3+187.654区间, 道路长3187.654米,设计时速为50km/h,路基宽度为25.5m。 主要设计内容内容如下: 1、路线设计: 在进行平面线形设计和纵断面设计的时候需要当地现有的地形图作为参考。设计出来的道路要求线形平顺、土方添挖平横、调配合理、工程总造价较为经济,符合相关规定。 2、路基设计:每隔100m进行土方的填挖计算以及其调配问题。并且保证其在不同的干湿状态下稳定可靠。 3、路面设计:所设计的混凝土路面,首先要满足各项设计指标,在此至于要求经济合理,以便于施工。 4、路基、路面的排水设计: 路基排水采用了边沟作为排水设施; 路面排水,主要是路面的起拱设计以及中央分隔带的排水设计。 5、桥涵设计:包括桥梁的类型、基本的尺寸的设计。 6、英文翻译:翻译相关英文文献一篇。 53194

毕业论文关键词:城市道路; 线形设计; 混凝土路面设计; 交叉口设计。    

Abstract      In order to test my four years study and construct the foundation of my future work. I choose the title of Urban road (II class,Huiyang Road) design of Zhangjiagang to be my graduation design. The stake of my road is K0+000 to K3+187.654(the length of the road is 3187.654m). The design speed is 50km/h. The width of the subgrade of the road is 25.5m. The main contents of this design project includes: (1) Make sure the vertical section in condition on the landform which is known. (2) The design of the subgrade: analyze the stability of brae; the fill or dig height of every peg e.g. (3) The design of pavement, and this contents that the select of the construction about concrete and asphalt pavement in different case. (4) The design of the drainage project, protective project, subgrade reinforced project, and these are very important to the whole work. (5) The design of the bridge and culverts which include size and form. (6) Translate an English article into Chinese. 

Keywords: URBAN ROAD   CULVERT  ROAD SURFACE  ACROSS DESGIN   

目录

第一章绪论.1

第二章工程概况.1

2.1工程概况1

2.2设计依据2

2.3设计规范2

2.4设计标准2

2.5道路概况3

2.6道路选线4

第三章路线平面设计4

3.1线形设计一般原则4

3.2平面线形要素的组合类型5

3.3平面设计方法5

3.4平面曲线计算5

3.4.1平曲线要素计算6

第四章道路纵断面设计10

4.1道路竖向设计注意因素及原则.10

4.2竖曲线设计.10

4.3平面线形和纵断面的结合.12

第五章道路路基设计14

5.1道路横断面的设计原则.14

5.2路基横断面的布置.14

5.3道路加宽及超高设计.15

5.4道路横断面设计.15

5.5路基设计说明.16

第六章道路路面设计16

6.2初拟路面结构.17

6.3路面材料参数确定.18

6.4荷载疲劳应力.18

6.5温度疲劳应力.20

第七章土方计算21

7.1基本公式.21

7.2路基土石方调配.21

第八章交叉口设计26

8.1要点及方法.26

第九章桥涵设计27

第十章排水设计28

10.1城市道路排水设计的内容28

10.2设计依据28

10.3路基排水设计28

10.3.1地表排水设备的类型28

10.3.2边沟设置29

10.4路面排水设计30

10.4.1路面表面排水30

第十一章交通设施设计31 张家港市二级城市道路(惠阳路)设计 :http://www.751com.cn/gongcheng/lunwen_57266.html

------分隔线----------------------------
推荐内容