毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

鸿业道路设计双向6车道清石路一级公路初步设计+CAD图纸

时间:2020-07-18 17:15来源:毕业论文
路线的平、纵、横设计,路基、路面设计和排水设计以及交通设施设计, 并完成施工图设计阶段应完成的各种图、表及设计说明书。本次设计运用电子地形图以及鸿业道路设计软件进行设

摘要按照平原微丘区一级公路设计要求,根据设计公路的交通量及其使用任务和性质,确定公路等级为一级公路。在此基础上,结合沿线自然条件与主要技术指标,进行路线方案论证与比选,最终确定一个最佳方案进行详细技术设计。其主要内容包括:路线的平、纵、横设计,路基、路面设计和排水设计以及交通设施设计, 并完成施工图设计阶段应完成的各种图、表及设计说明书。本次设计运用电子地形图以及鸿业道路设计软件进行设计,提高了设计的准确度。最后确定本一级公路设计速度为100km/h,路基的宽为33.5米,车道为双向6车道,设计的整个路线全长为3009.973米,路面性质为沥青混凝土面层。52542

毕业论文关键词: 线形设计;路基;路面;平曲线;竖曲线

Abstract According to the requirements of mountain highway design, the grading of highway is based on the traffic volume, the use of task and nature. Then, through combining natural conditions along and the main technical indicators, evaluating and electing the route, ultimately determine the best option for a detailed technical design. Its main contents include: plane design, vertical curve design, transect curve design, roadbed design, road surface design, drainage design and traffic facilities design. In addition, all kinds of the figures, tables, and specifications are given in detail in this paper. The use of electronic topographic map and Hong ye road design software for design improved design accuracy. After conducting technical feasibility studies, the designing velocity is 100 km / h. The width of the roadbed is 33.5 meters with six two-way lanes. The length of the road is 3009.973meters. The road’s surface is paved by asphalt concrete. 

Keywords: liniment design;Roadbed;pavement;plane curve;vertical curve

 目录 

第一章 概论1

 1.1  路线概括1

 1.2  设计内容1

第二章 公路等级确定..3

 2.1  交通量计算.3

 2.2  确定公路等级..4

第三章 路面设计.5

 3.1  选线设计5

  3.1.1  方案比选的意义5

  3.1.2  路线选择的基本要求..5

  3.1.3  路线比选的主要因素..5

  3.1.4  方案比选6

 3.2   路面线形设计.7

  3.2.1  路线平面设计的技术指标.7

  3.2.2  平曲线计算.8

 3.3   路面结构设计.9

  3.3.1  轴载分析9

  3.3.2  结构组合与材料选取与计算.12

第四章 纵断面设计21

 4.1  路线设计..21

  4.1.1  点绘地面线21

  4.2  高程控制点的确定..21

  4.3 确定纵坡度和变坡点的位置 22      

 4.4 竖曲线设计标准25

 4.5 竖曲线要素的计算.25

第五章 横断面设计30

 5.1 规范要求30

 5.2 路基横断面布置30

 5.3 超高设计..31第六章 土石方的计算和调配..36

 6.1 调配要求36

 6.2 调配方法36

第七章  道路沿途及相关设施设计 .45

 7.1 安全护栏45

 7.2 照明设施46

 7.3 防噪设施47 

第八章  路基设计.. ..48

 8.1 路基的横断面..48

  8.1.1 路基横断面布置48

  8.1.2 路基的组成.48

 8.2 路基防护48

 8.3 路堤边坡防护..49

 8.4 路堑边坡防护..49

 8.5 取土坑、弃土堆及碎落台的设计..49

  8.5.1 取土坑..49 鸿业道路设计双向6车道清石路一级公路初步设计+CAD图纸:http://www.751com.cn/gongcheng/lunwen_56460.html

------分隔线----------------------------
推荐内容