毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

南徐中学教学楼5层框架结构设计+CAD图纸

时间:2020-06-20 15:38来源:毕业论文
南徐中学教学楼,5层框架结构,层高为3.6m。总高度为18m建筑总面积为1021.554m2。经过细致的方案论证,我们决定上部结构采用纵横向承重的钢筋混凝土框架结构。因为该工程抗震设防烈

摘要本工程为南徐中学教学楼,5层框架结构,层高为3.6m。总高度为18m建筑总面积为1021.554m2。经过细致的方案论证,我们决定上部结构采用纵横向承重的钢筋混凝土框架结构。因为该工程抗震设防烈度为7度,所以不考虑竖向地震作用。在用底部剪力法求出水平地震作用后,利用D值法完成了水平地震作用下的一榀框架的内力组合计算。采用弯矩二次分配法分别完成了恒载和活载最不利布置作用下的内力计算。接着进行结构构件的地震作用效应与其它荷载效应的基本组合及无地震作用效应与其它荷载效应的基本组合两种情况,对框架内力进行组合,得出框架梁柱的控制内力,进而完成了梁柱截面的配筋计算。进行了独立基础的计算及零星构件的计算。用AutoCAD2007、PKPM2008软件等计算并绘制本工程建筑和结构施工图。51293

毕业论文关键词: 地震、框架结构、二次分配法、荷载内力组合、截面设计、教学楼

Abstract

This project is a building of the Nan Xu Middle School’s Teaching Building. This subject is five stories frame structure. The Storey is 3.6mand3.3m . The total height of 15.3m and 14.1m.The total building area of this project is 1968.192m2.After complicated analysis, the frame structure of supporting weight in lengthways and transverse direction of reinforced concrete is adopted for the superstructure of this building .As the anti-earthquake degree is 7,vertical earthquake is skipped.  After the horizontal earthquake is calculated by the bottom-shear method, the Value D method is applied to calculate the stress of a frame under horizontal earthquake. Then the stress under vertical dead load and the most adverse-arrange live load is calculated by the double-moment-pided method. Considering the two cases: the basic combination of the earthquake and the load and the basic combination of the load and no earthquake, the load effect combination is carried off. So according to the stress and of beams and columns, the section design is finished .The calculation of the independent foundation and other members are carried on. The software of AutoCAD2007and PKPM2008 is applied to calculation and draw the pictures of the building and structure construction. 

Keyword:earthquake,frame structure, stress, double-moment-pided method, load effect combination, section design,teaching building

目  录

第一章 绪论 1

1.1选题的目的及意义 1

1.2国内外研究情况和存在的一些问题 1

1.3本选题的主要研究内容 2

第二章 建筑说明书 2

2.1 设计要求 2

2.2 耐火等级、防火疏散和采光通风 2

2.3 平面布置 3

2.4 立面布置 3

2.5 垂直交通设计 3

2.6 其他构造设计 3

2.7 设计依据 3

第三章  结构设计 4

3.1框架结构布置及计算简图 4

3.2恒荷载内力计算 6

3.2.1恒荷载计算 6

3.2.2恒荷载作用下内力计算 8

3.3 活荷载内力计算(屋面布雪荷载) 19

3.3.1活荷载计算 19

3.3.2活荷载作用下内力计算 南徐中学教学楼5层框架结构设计+CAD图纸:http://www.751com.cn/gongcheng/lunwen_54882.html

------分隔线----------------------------
推荐内容