毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

某超高层建筑塔楼部分消防设计+CAD图纸

时间:2018-05-19 16:39来源:毕业论文
工程塔楼高度达236.2m,火灾自动报警系统保护对象等级为特级。探测区域内所需设置的探测器数为48个。每个楼层设置一个手动报警按钮,布置在楼梯口区域,靠墙安装,其底边距地面的

摘要本工程是某超高层办公楼。本建筑其占地总面积为11005平方米,总建筑面积为 133449平方米,地上建筑面积为101246平方米,其中塔楼部分主体高度为222.60米,塔楼1-4层,除办公大堂外均为商业用地,塔楼4层以上均为办公用地。23041
超高层塔楼具有火灾蔓延迅速,火势发展快;人员密度大,疏散较困难;危建筑内部结构复杂,火灾扑救难度大等特点。如果消防设计不当,将会存在很大的火灾隐患。
该超高层办公楼的建筑等级为一类建筑,耐火等级为一级消防车道为环形车道,距离建筑外墙设计距离为5m,消防车道宽度为4m,拐弯半径为4m,本工程每层设一个防火分区,竖向管道井孔洞、楼梯间、电梯井等及外窗等火灾竖向蔓延的部分,划分为竖向防火分区。房间门到最近的楼梯间的最大距离为35m。该塔楼每层共设计有2个防烟楼梯间,楼梯宽度为1.35m。必需疏散时间为6min。塔楼部分共设有3个避难层。分别设在7层、22层、37层。屋顶设有直升机停机坪。
本工程超高层塔楼部分室内消火栓系统设置3根立管。室内消火栓用水量为22.8L/s。每层室内共设有6个消火栓,消火栓保护半径为29.2m,每两个消火栓之间的距离为23.7m。室内消火栓用水量为40L/s。
本工程的火灾危险等级为中危险I级。场所所有部位均采用环式管网的湿式自动喷水灭火系统。系统的供水管道布置成环状。喷头工作压力为0.1MPa,喷水强度为6 L/min.m2。作用面积为160m2。单个喷头的最大保护面积为12.5m2。喷头流量系数为80。喷头工作压力为0.088MPa。此次设计所有的喷头的布置以正方形布置。喷头边长选用3.4m。保护面积为11.5m2。作用面积内的喷头的数量为14个。每排最大喷头数为13个,系统设计流量为21.603L/s。
本工程塔楼高度达236.2m,火灾自动报警系统保护对象等级为特级。探测区域内所需设置的探测器数为48个。每个楼层设置一个手动报警按钮,布置在楼梯口区域,靠墙安装,其底边距地面的高度为1.3m,且有明显的标志。
毕业论文关键词:塔楼;消防设计;超高层;消防安全
A high-rise building of the tower fire protection design
The general description of the design:
This project is a super high-rise office building. The building which covers a total area of 11005 square meters, a total construction area of 133449 square meters, the ground floor area of 101246 square meters, of which the tower body height is 222.60 meters, tower 1-4 layer, except the office lobby are outside the commercial land, tower above 4 for office space.
Super high-rise building with the fire spread quickly, the rapid development;density, evacuation is difficult; the internal structure of dangerous building complex, characteristics of fire fighting difficult. If the fire protection design properly, there will be danger.
Fire protection design of the project is to code for fire protection design building and related industry standards as the basis, combined with the actual engineering situation to carry out related work. Through scientific and rational design, to enhance the level of building fire safety, security personnel in the building purpose. The concrete design content includes: building fireproof rank determination, construction general layout,construction design of the smoke control system and automatic alarm system design.
The high-rise office building is graded as a kind of building, fire resistance rating for a level. The building fire lane Ring Road, from the exterior design distance is 5m, the fire lane width is 4m, the turning radius is 4m, the each layer is provided with a fire district, part of the vertical pipe well hole,staircases, elevator wells and window vertical spread of fire, pided into vertical fireproof partition. The tower building each layer has 4 exits, each exit width is 2.7m. The building room door to the maximum distance from the nearest staircase is 35m. The tower each layer is designed with 2 smoke preventing staircase, staircase width is 1.35m. Required evacuation time is 6min. The construction of the tower has a total of 3 refuge floor. Respectively in the 7 layer, 22 layer, 37 layer. Rooftop helipad. 某超高层建筑塔楼部分消防设计+CAD图纸:http://www.751com.cn/gongcheng/lunwen_15957.html
------分隔线----------------------------
推荐内容