毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

燃油深度脱硫用石油焦基活性炭复合材料的制备及其性能研究

时间:2017-05-26 11:35来源:毕业论文
活性炭作为一种环境友好的材料在吸附储能和高级水处理方面的应用备受关注。石油焦原料结构对预氧化及活化性能有显著影响。以细镶嵌型光学结构为主、晶化程度较低、挥发份含量

摘要:活性炭的孔结构发达,表面积大,不但吸附性能优异,还具有化学稳定性好,机械强度高,易于再生利用等一系列特点,被广泛应用于工业、国防、化工、环保等领域。尤其近年来随着可持续发展的需要,活性炭作为一种环境友好的材料在吸附储能和高级水处理方面的应用备受关注。石油焦原料结构对预氧化及活化性能有显著影响。以细镶嵌型光学结构为主、晶化程度较低、挥发份含量高的石油焦具有较高的反应活性,制备的活性炭更易于形成发达的孔隙。9280
关键词:石油焦;活性炭;水蒸气活化;脱硫
The preparation of activated carbon from petroleum coke, and the desulfurization performance
Abstract:Activated carbon was not only an excellent adsorbent, characterized by developed porosity and large surface area, but also it had good chemical stability,  high mechanical strength,easy regeneration, et a1. It was used extensively in industry,  military, chemical engineering environmental protection, and so on. Recently, with the trend of sustainable development activated carbon as an environmental-friendly material, attracted great attention for energy storage and advanced water treatment. There are great influences of original cokes on the pre-oxidation and activation. The petroleum coke possessing small mosaics, small crystals and low volatile component was favorable for the preparation of activated carbon with large specific surface owing to its higher reaction activity.
Key words:petroleum coke;activated carbon;desulfurization

目 录
1 绪论    5
1.1 研究目的意义    5
1.2 研究内容和目标    6
2 文献综述    6
2.1 石油脱硫的方法    6
2.1.1 炭气凝胶    6
2.1.3 吸附脱硫技术    7
2.1.4 络合脱硫法    8
2.1.5 萃取脱硫技术    8
2.1.6 选择性氧化法脱硫    8
2.2石油焦基活性炭的优点    8
2.2.1 石油焦的概述    8
2.2.2 石油焦基活性炭作为活性组分载体的优点    8
2.3活性炭脱硫的优点    9
2.3.1 硫在汽油和柴油中的存在形式    9
2.3.2 活性炭的优点    9
2.4 活性炭的脱硫机理    9
2.4.1 物理作用脱硫机理    9
2.4.2 分子尺寸选择脱硫机理    10
2.4.3 酸性位吸附机理    10
2.4.4 催化氧化机理    10
2.4.5 络合吸附机理    11
3 实验部分    11
3.1 实验用主要原料    11
3.2 实验用仪器    12
3.3 材料制备    12
3.3.1 石油焦基活性炭的制备    13
3.4 活化条件的影响    14
3.4.1炭化温度的影响    14
3.4.2活化温度的影响    14
3.4.3 活化时间的影响    14
3.4.4 水蒸气用量的影响    14
3.5 活性炭的表面改性    15
3.5.1 调整孔结构    15
3.5.2 化学改性    15
3.6 表征方法    16
3.6.1 热重分析    16
3.6.2 低温氮气吸脱附    16
3.6.3 红外光谱    17
3.6.4 扫描电镜    17
3.6.5 X射线衍射    17
4 结果分析    17
4.1 比表面积对比分析    17
4.2 孔径对比分析    21
4.3 孔体积(孔容孔隙)对比分析    21 燃油深度脱硫用石油焦基活性炭复合材料的制备及其性能研究:http://www.751com.cn/cailiao/lunwen_7932.html
------分隔线----------------------------
推荐内容