毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

Mg基块体金属玻璃的制备及其储氢性能研究

时间:2021-05-20 20:20来源:毕业论文
综述了Mg-Ni系储氢合金的相关研究基础上,以具有高非晶形成能力(GFA)的Mg-Ni-La金属玻璃系合金为研究对象,制备金属玻璃(非晶合金)。用XRD、金相观察、SEM和EDS等方法对金属玻璃进

摘要块体金属玻璃由于其特殊的结构产生了迥异于晶态金属合金的性能,例如高的强度、硬度、优于晶态金属合金的储氢性能。Mg基非晶合金与一般的Mg合金相比,有着较好的吸放氢动力学性能和较低的放氢温度,并且它的容量大、价格低、资源丰富,是很有发展前景的新型储氢合金材料。本文在综述了Mg-Ni系储氢合金的相关研究基础上,以具有高非晶形成能力(GFA)的Mg-Ni-La金属玻璃系合金为研究对象,制备金属玻璃(非晶合金)。用XRD、金相观察、SEM和EDS等方法对金属玻璃进行观察并对其的结构和成分加以研究。利用DSC方法研究金属玻璃的热力学性能,在CT2001 A型蓝电测试仪中进行金属玻璃充放电循环性能的研究讨论。67179

毕业论文关键词:金属玻璃,储氢合金,微观形貌,结构,热力学性能,电化学性能

毕业设计说明书(论文)外文摘要

Title    Preparation and hydrogen sorption properties of a Mg-based bulk metallic glass  

Abstract BMG has quite different performance from the crystalline metal alloy, such as high strength, hardness, better than crystalline metal alloy hydrogen storage properties. Mg-based amorphous alloys compared with the general Mg alloy, have better hydrogen absorption and desorption kinetics, lower desorption temperature. And its large capacity, low price, rich in resources, Mg-based amorphous alloys is promising new hydrogen storage alloy material. This paper summarizes the Mg-Ni-based hydrogen storage alloys related research,To have a high glass-forming ability (GFA) of Mg-Ni-La BMG system as the research object,preparation of metallic glass amorphous alloy. By XRD, metallographic observation, SEM and EDS were observed on the metallic glass and its structure and composition to be studied. Researching the thermodynamic properties of metallic glasses by DSC, then using the CT2001 A blue electric tester for charge-discharge cycle performance of BMG to research and discussion.

Keywords  BMG, hydrogen storage alloys, morphology, structure, thermodynamic properties, electrochemical properties

  目   次  

1  绪论 1

1.1 块体金属玻璃简介 1

1.2  Mg-Ni系储氢合金研究现状 1

1.2.1机械合金化工艺制备非晶合金研究现状 2

1.2.2  熔体快淬方法制备非晶合金研究现状 4

1.3 问题的提出及研究的意义 7

2.1  实验原材料 8

2.2  块体金属的制备 8

2.2.1  Mg基块体非晶母合金的制备 8

2.2.2   Mg基块体非晶的制备 8

2.3  块体金属玻璃结构分析 9

2.3.1  XRD分析 9

2.3.2  金相观察 9

2.3.3  SEM和EDS分析 9

2.4  块体金属玻璃热力学性能与电化学性能分析 9

2.4.1  DSC热力学性能分析 9

2.4.2  电化学放电循环性能测试 10

3  Mg-La-Ni块体金属玻璃的结构研究 11

3.1  X射线衍射结果分析 11

3.2  块体金属玻璃微观形貌观察 Mg基块体金属玻璃的制备及其储氢性能研究:http://www.751com.cn/cailiao/lunwen_75284.html

------分隔线----------------------------
推荐内容