毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

水热合成YFeO3及其性能研究+文献综述

时间:2017-04-19 22:36来源:毕业论文
论文综述了铁酸钇的结构、应用和制备方法。针对铁酸钇制备存在的问题,本研究采用水热合成法来制备铁酸钇,而据我们所知,尚未见到这方面的报道

摘要: 稀土正铁氧体 YFeO3 呈正交钙钛矿结构,其晶体在电极材料、气相传感器、光催化剂及环境监控等方面具有广泛的应用。 本论文综述了铁酸钇的结构、应用和制备方法。针对铁酸钇制备存在的问题,本研究采用水热合成法来制备铁酸钇,而据我们所知,尚未见到这方面的报道。本文研究了温度、pH值对产物物相的影响。研究结果表明,采用前驱物由氧化钇、硝酸、硝酸铁、氨水产生的混合沉淀物洗涤之后,采取最佳的合成条件(温度为 220℃、pH为 10.5、反应时间为7小时),获得了较纯的YFeO3粉体。7388
关键词:  YFeO3;水热合成法;沉淀法;钙钛矿  
Hydrothermal Synthesis of YFeO3 and the Study of its
Properties   
Abstract:    Rare earth orthoferrite YFeO3 crystal with orthorhombic perovskite structure  has
a wide range of applications  in the field of  the electrode material, gas sensors, photocatalysts
and environment monitoring, etc.  The structure of  yttrium iron,  application and synthesis
methods were  reviewed.  In view of existing problem of  preparation method,  hydrothermal
synthesis method was chosen  to prepare yttrium iron. As we know,  the preparation of yttrium
iron by hydrothermal synthesis method  has  not  been  reported.  In this study, the influence of
temperature and pH value on the product phase were studied. Research results show that, the
precursors with  yttrium oxide, nitric acid, ferric nitrate and ammonia  form mixed sediments.
After the precipitate  was  washed  and  the  optimum  synthesis conditions  were taken
(temperature at 220  ℃, pH at 10.5, the reaction time of 7 hours), pure YFeO3 powders were
obtained.
Keywords:  YFeO3; Hydrothermal  Synthesis  Method; Method of Precipitation;  Perovskite.   v
目录
摘要   iv
Abstract  . iv
目录  . v
1  绪论  . 1
1.1  铁酸钇  . 1
1.1.1  YFeO3理化性质  . 1
1.1.2  YFeO3晶体结构  . 1
1.1.3  YFeO3 的应用   3
1.1.4  YFeO3 粉体的合成   3
1.2  水热法  . 4
1.2.1  水热法的简介  . 4
1.2.2  水热反应机理  . 4
1.2.3  水热法合成的特点  . 5
1.2.4  水热法制备粉体的主要方法  . 5
1.2.5  溶剂热法的简介  . 6
1.2.6  水热、溶剂热反应装置和技术程序  . 6
1.2.7  水热合成材料的一般步骤  . 6
1.3  本文的立意和主要内容  . 7
1.3.1  本文的立意  . 7
1.3.2  本文的主要内容  . 7
2  实验  . 8
2.1  试剂与仪器  . 8
2.2  实验方案  . 13
2.2.1  方案一  . 13
2.2.2  方案二  . 14
2.2.3  方案三  . 14
2.3  表征方法  . 14
3  结果与讨论  . 16
3.1  前期过滤操作对样品合成的影响  . 18
3.2  后期反应介质对样品合成的影响  . 19
3.3  PH值对样品合成的影响  . 21
3.4  反应温度对 YFEO3合成的影响   22
3.5  反应时间对 YFEO3合成的影响   23
3.6  铁酸钇的 XRD图谱分析   23
3.7  铁酸钇的 SEM图谱分析. 26
4  结论  . 29
 
致谢  . 30
参考文献  . 31
1 绪论
近年来,关于稀土正铁氧体(ReFeO3)的系列研究已经揭示出其独特的物理化学 水热合成YFeO3及其性能研究+文献综述:http://www.751com.cn/cailiao/lunwen_5334.html
------分隔线----------------------------
推荐内容