毕业论文

打赏
当前位置: 毕业论文 > 材料科学 >

纯钙包芯线的防喷溅研究+文献综述

时间:2017-04-11 18:41来源:毕业论文
论文介绍了包芯线的生产设备及工艺流程,存在问题,其处理方法,详解了钙处理的若干理论问题。对纯钙包芯线和硅钙包芯线的使用效果进行了实验研究

摘要:包芯线在炼钢过程中得到了广泛使用,它主要起脱硫脱氧,净化钢液,减少和消除水口堵塞的作用。本毕业论文介绍了包芯线的生产设备及工艺流程,存在问题,其处理方法,详解了钙处理的若干理论问题。对纯钙包芯线和硅钙包芯线的使用效果进行了实验研究,实验结果表明:实芯纯钙线的回收率为13.36%,高于硅钙线的5.71%,回收率提高132.28%。结合在工厂中钙线的试用情况得出了关于喂线速度,钢种类型,供钙速度 对钢水钙处理的钙收得率,喷溅情况的影响,通过理论计算及生产实践,纯钙线的喂入速度应控制在1.6-2.2m/s比较合适,供钙速度应控制在0.11 kg/min 以下。关键词:实芯纯钙包芯线 ;喂线速度;喷溅情况7055
Study on spattering of solid core calcium pure wire
Abstract:Cored wire has been widely used in the process of steelmaking , it is mainly used to do desulfurization and deoxidation , purify the molten steel, reduce and eliminate nozzle clogging .This paper introduces the equipments ,technological process of cored wire, existing problems in the process and the treatments measures, it recounts some theoretical issues of calcium treatment. Comparing the using effect of pure calcium cored wire with Ca-Si cored wire by experiment, the experimental results show: recovery of solid-core calcium pure wire is 13.36%, higher than the 5.71% of Ca-Si cored wire, recovery rate is improved 132.28%. Combined with the effects of cored wires applied in the factory, it comes to  result that how wire feeding speed, types of steel, calcium supply speed influent recovery efficiency and the sputter. Through the theoretical calculation and production practice, the feeding speed of solid-core calcium pure wire should be controlled in 1.6-2.2m/s.Speed for calcium should be controlled under 0.11 kg/min
Key words: solid-core calcium pure wire;wire feeding speed; Sputter
目录
1 前言    1
1.1 包芯线概述    1
1.1.1 包芯线技术现状及发展概况    1
1.1.2 纯钙包芯线在炼钢生产中的作用    1
1.2 包芯线生产工艺    2
1.2.1芯线的生产工艺    3
1.2.2 包芯线生产过程中存在的主要问题    5
1.3 钢水钙处理的若干理论问题    6
1.3.1 钙处理的脱硫和脱氧    6
1.3.2 钙处理对硫化物夹杂变性行为    8
1.3.3 钙处理对Al2O3夹杂变性行为    10
1.3.4 钙处理防止水口堵塞的行为    12
1.4 喂线工艺    15
1.4.1 喂线机技术    15
1.4.2 喂线机理    16
1.4.3 喂线过程中碰到的问题    17
1.5 课题研究目的和意义    18
1.6 研究内容和目标    18
1.6.1 研究内容    18
1.6.2 研究目标    18
2实验    19
2.1实验用原材料    19
2.2. 实验方案    19
2.2.1包芯线的制备    19
2.2.2实芯钙线和硅钙包芯线对钙收得率和喷溅情况的影响    20
2.2.3 精炼工艺、钢种及喂线速度对钙收得率及喷溅情况的影响    21
2.2.4 供钙速度对钙收得率及喷溅情况的影响    22
2.3实验过程    22
2.3.1实芯钙线喂入量的确定    22
2.3.2 实验条件    23
2.3.3 实验过程    23
3讨论和分析    24
3.1 实芯钙线与硅钙线对钙收得率及喷溅情况的影响    24
3.2 工艺、钢种及喂线速度对钙收得率的影响及喷溅的影响    26 纯钙包芯线的防喷溅研究+文献综述:http://www.751com.cn/cailiao/lunwen_4809.html
------分隔线----------------------------
推荐内容