毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

9C51单片机铁路应答器检测系统的设计

时间:2021-07-25 16:58来源:毕业论文
对应答器检测系统中的检测仪表进行研究与设计。通过对检测仪表的硬件设计和软件开发,设计出能够检测铁路应答器的安装是否符合规范以及能否正常工作的检测仪表。硬件采用89C5

摘要本文铁路应答器检测系统是采用检测仪表对铁路应答器进行检测的系统。相比于传统铁路采用的轨道电路,应答器不存在断轨,异物阻碍,电路异常断线等问题,它通过地面设备和车载设备实现了地车之间的实时信息交换,以及列车当前信息与列控中心的监控与防护,使得列控中心能更高效地进行列车定位和速度防护,大大提升了列车行驶过程中的安全性与可靠性。

本文对应答器检测系统中的检测仪表进行研究与设计。通过对检测仪表的硬件设计和软件开发,设计出能够检测铁路应答器的安装是否符合规范以及能否正常工作的检测仪表。硬件采用89C51型单片机作为微处理器,A/D转换器选用ADC0804。软件对DBPL信号的测量采用测量频率法。通过软硬件的结合,实现对铁路应答器检测系统的设计。69870

该论文有图12幅,表1个,参考文献35篇。

毕业论文关键词:应答器  检测系统  检测仪表

Design of Railway transponder detection system

Abstract The design of the railway system is the use of a transponder detection detection instrument for detecting the transponder railway system. Compared to conventional rail track circuit using the transponder does not exist off the rail, foreign body obstruction, abnormal circuit disconnection and other issues, it is by ground equipment and on-board equipment to achieve a real-time information exchange between vehicles, as well as current information and train monitoring and protection of train control center, so that the train control center can more efficiently locate and train speed protection, greatly enhance the process of moving train safety and reliability.

In this paper, the transponder detection system instrumentation research and design. Through the instrumentation hardware design and software development, rail design capable of detecting transponder installation meets the specifications and can work properly instrumentation. Hardware using 89C51 microcontroller as a microprocessor, A / D converter used ADC0804. Software for measuring DBPL signal by measuring the frequency method. By combining hardware and software, to achieve the railway transponder detection system design.

The papers have 12 figures, 1 table and 35 references.

Key Words: Transponder  Detection system  Detection Instruments

目录

摘要 IV

Abstract V

图清单 VIII

表清单 VIII

1 绪论 1

1.1 铁路发展历史 1

1.2 研究背景及意义 1

1.3 研究现状及发展趋势 5

1.4 文章组织结构 8

2 铁路应答器检测系统概述 9

2.1 铁路应答器检测系统工作原理 9

2.2 铁路应答器检测系统功能与组成 10

2.4 检测仪表的功能与组成 11

2.5 本章小结 12

3 检测系统硬件设计 13

3.1 微处理器的选择 13

3.2 数据采集模块的简介 16

3.3 A/D转换器的选型 17

3.4 显示接口电路设计 20

3.5 本章小结 22 9C51单片机铁路应答器检测系统的设计:http://www.751com.cn/zidonghua/lunwen_78923.html

------分隔线----------------------------
推荐内容