毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

fluent强化换热结构的仿真计算

时间:2021-04-24 09:57来源:毕业论文
为强化换热结构的仿真计算,目的使能源得到高效利用,换热器达到最佳换热效果。前人已经对此进行了许多实验与仿真的探索,通过这次毕设,我认识到处理仿真计算的各种方法

摘要本次设计的题目为强化换热结构的仿真计算,目的使能源得到高效利用,换热器达到最佳换热效果。前人已经对此进行了许多实验与仿真的探索,通过这次毕设,我认识到处理仿真计算的各种方法。66217

本课题将主要通过计算机仿真的方式,分别对各主要因素对换热性能的影响进行讨论。建立较为完善的换热结构计算模型,再进行有限元网格划分。在有限元软件中将建立的带网格的几何模型设置应该使模型尽量满足导热方程,包括边界条件。然后在fluent的基础上用c++得出已建的模型在不同工况下的换热效率,从而实现最佳换热结构的仿真模拟。

毕业论文关键词  仿真计算  波纹管翅片  强化换热   

毕业设计说明书(论文)外文摘要

Title     Simulation of heat transfer enhancement structure               

Abstract

The topic of the graduation desin is simulation of hate transfer enhancement structure.For efficient use of energy,heat transfer enhancement structure of heat exchanger has been the industry efforts in the direction.So many people had explored about this

   This topic will be mainly through computer simulation methods, respectively, of the main factors affecting the performance of the heat exchanger for discussion. Establishing a more comprehensive model of the heat exchanger structure calculation, then the finite element mesh. In the finite element software will create a geometric model with a grid settings should try to meet the heat conduction equation of the model, including boundary conditions. Then fluent based on results using c + + model has been built in different conditions of heat transfer efficiency, in order to achieve the best heat transfer structure simulation. 

Keywords  simulation  bellows fin  enhanced heat transfer

                                                               

        

目   次

1  引言1

1.1 强化换热 1

1.2  fluent基本介绍 1

1.3  软件的二次开发  1

2  换热器概述 2

2.1  换热器应用  2

2.2  换热器的主要分类  2 

2.3  换热器强化换热技术及展望4

3  模型的建立与网格划分 6

3.1  模型的建立  6

3.2  边界定义  9 

3.3  网格划分  10

4  fluent计算  11

4.1  检查网格  11

4.2  设置单位12

4.3  设置计算参数12

4.4  迭代计算14

5  vc++的二次开发 14

5.1  参数化建模  15 

5.2  程序设计15

6  实验结果与分析 16

6.1  仿真结果分析 18

6.2  基础因素对传热的影响 18

总结 19

致谢 21

参考文献 22

                                                                       

1 引言

1.1  强化换热

换热器重要的温度控制装置,应用于很多领域。伴随着先进化的技术,人们对换热技术的研究也越来越深入。形成了以 CFD、模型化技术、强化传热技术及新型换热器开发等一个高技术体系。其中强化传热是国内外传热学界研究的热门课题。理论方面,我国学者过增元教授证明了减小速度矢量与温度梯度之间的夹角是强化对流换热的有效措施[1]。 fluent强化换热结构的仿真计算:http://www.751com.cn/zidonghua/lunwen_74043.html

------分隔线----------------------------
推荐内容