毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C52单片机的智能信号源设计+电路图+程序

时间:2020-12-01 20:27来源:毕业论文
利用单片机作为主控制器,进行智能信号源发生器设计,并利用proteus进行仿真调试。本课题要求能产生方波、锯齿波、三角波、正弦波等波形,波形输出类型、幅度和频率均可由相应的

摘要单片机是一种集成在电路芯片,采用超大规模集成电路技术把具有数据处理能力的中央处理器、CPU随机存储器RAM、只读存储器ROM、多种I/O口和中断系统、定时器/计时器等功能(可能还包括显示驱动电路、脉宽调制电路、模拟多路转换器、A/D转换器等电路)集成到一块硅片上构成的一个小而完善的计算机系统。60122

本系统利用单片机作为主控制器,进行智能信号源发生器设计,并利用proteus进行仿真调试。本课题要求能产生方波、锯齿波、三角波、正弦波等波形,波形输出类型、幅度和频率均可由相应的控制按键进行选择设置。另外,当前输出波形的类型要有相应的指示灯提示。系统设计简单、性能优良、性价比高,可用于多种需要低频信号源的场所,具有一定的实用性。

毕业论文关键词  单片机  信号发生器  D/A转换器   proteus

毕业设计说明书(论文)外文摘要

Title    Intelligent Signal Source Design Based On   Microcontroller                                                

Abstract

Microcontroller is a kind of integrated circuit chip, using very large scale integrated circuit technology with data processing ability of the central processing unit, RAM, ROM, a variety of I/O port and interrupt system, timer function (may include display driver circuit, pulse width modulation circuit, analog multiplexer and A/D converter circuit) are integrated into the piece of silicon wafer that constitutes a small and perfect computer system.

This system uses microcontroller as the main controller for intelligent signal generator design, and uses the proteus simulation debugging. This  subject require to produce square wave, zigzag wave, triangle wave, sine wave, the output type, amplitude and frequency of the waveforms can be controlled by the corresponding button to select settings. In addition, the current output waveform type must have the corresponding indicator light hint. This system design is simple, high performance, cost-effective, can be used for a variety of needs of low-frequency signal source, and it has a certain practicality.

Keywords  microcontroller  signal generator  proteus   simulation

目   次

1  引言(或绪论)…… 5

2  系统设计… 5

2.1  设计要求 5

2.2  设计方案 5

3  硬件设计… 6

3.1  D/A转换器的电路设计 6

3.2  波形及幅频改变的按键电路设计…… 7

3.3  指示灯显示电路设计… 8

3.4  AT89C52的电路设计… 8

软件设计… 9

4.1  主程序流程图… 9

4.2  子程序流程图… 10

4.2.1  按键处理子程序…… 11

4.2.2  波形产生子程序…… 11

5  仿真调试 14

5.1  波形显示仿真 14

5.2  功能仿真调试 17

6  改进和展望…… 20

结论   22

致谢   23

参考文献 … 24

附录A  … 25

附录B    26

1  引言(或绪论)

当今是科学技术及仪器设备高度智能化飞速发展的信息社会,电子技术的进步,给人们带来了根本性的转变,在现代电子领域中,单片机的应用正在不断的走向深入,这必将带来一场仪器设备高度智能化的全面革命。随着集成电路的迅速发展,用集成电路可很方便地构成各种信号波形发生器,而用集成电路实现的信号波形发生器与其它信号波形发生器相比,其波形质量、幅度和频率稳定性等性能指标,都有了很大的提高,特别是单片机应用技术的不断成熟,导致传统控制与检测技术的快速革新。单片机构成的仪器具有高可靠性、高性能价格比,在智能仪表系统和办公自动化等诸多领域中得以极为广泛的应用,特别是在电子工程、通信工程、自动控制、遥测控制、测量仪器、仪表和计算机等技术领域处处可以看见它的应用。 AT89C52单片机的智能信号源设计+电路图+程序:http://www.751com.cn/zidonghua/lunwen_65493.html

------分隔线----------------------------
推荐内容