毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

Saber高频环节矩阵式变换器的分析与设计

时间:2017-05-06 11:36来源:毕业论文
以全桥全波式高频环节矩阵变换器拓扑结构为例对单极性移相控制原理进行了稳态分析。设计了由单极性移相原理控制的 高频环节矩阵式变换器,利用Saber软件对电路进行了仿真研究

摘要本文首先论述了矩阵变换器的研究历程及发展现状。介绍了高频逆变技术、矩阵变换技术的概念及其优缺点,并基于矩阵变换器中的双向开关模块提出了四种构成方案:串联型、并联型、桥式型和混合型;阐述了高频环节矩阵式变换器的两种控制方法:解结耦控制与单极性移相控制。以全桥全波式高频环节矩阵变换器拓扑结构为例对单极性移相控制原理进行了稳态分析。设计了由单极性移相原理控制的 高频环节矩阵式变换器,利用 Saber 软件对电路进行了仿真研究,仿真结果验证了该控制策略的可行性。8217
关键词   矩阵式变换器  高频  单极性
毕业设计说明书(论文)外文摘要
Title    Analysis and design of high frequency  matrix converter     
Abstract
The paper first discussed the course of research and development status of the matrix converter.
The next told us the High frequency inverter technology, the concept of matrix transformation techniques and their advantages and disadvantages, based on the matrix converter bi-directional switch module it proposed four component programs:series type, shunt type, bridge type and hybrid type;And described the two control methods of high frequency link matrix converter:phase shift control solution and junction coupling control with unipolar.And it analyzed full-bridge bi-directional voltage source full-wave high-frequency link inverter topology, based on the unipolar phase shift control principle of a steady-state.
Prototypes for   uni-polarity phase shifting controlled bi-directional voltage mode inverter with high frequency  link is designed.  Computer simulation was carried out in terms of Saber software and the results verify the feasibility of the proposed scheme.
Keywords  Matrix converter  High frequency  Unipolar  
目   次
1  绪论… 1
1.1  矩阵变换器概述 … 1
1.2  矩阵式变换器研究历程  1
1.3  本文研究的内容与意义  5
2  高频环节矩阵变换理论… 6
2.1  高频逆变技术概述  6
2.2  矩阵变换技术概述  6
2.3  双向开关模块概述  7
3  高频环节矩阵变换器控制方法 9
3.1  解结耦控制 … 9
3.2  单极性移相控制 … 16
4  单极性移相控制的稳态原理… 20
4.1  稳态原理  20
4.2  稳态外特性 … 24
5  电路设计与仿真 30
5.1  电路结构拓扑  30
5.2  电路性能指标  30
5.3  电路功率模块设计  31
5.4  控制模块设计  34
5.5  仿真结果  36
结论 … 39
致谢 …40
参考文献… 41
1  绪论
1.1  矩阵变换器概述
矩阵式变换器(MC)是一种基于双向开关并采用脉宽调制得到期望输出电压的电力变换装置,可以产生交流或直流电压。
狭义的矩阵式变换器仅指普通三相-三相矩阵式变换器。这种电路拓扑应用面广,是被研究的最早也是最多的一种矩阵式电力变换形式。普通三相-三相矩阵式变换器由9个双向开关( ,i=A,B,C;j=a,b,c)组成,每个双向开关均具有双向导通和双向关断的功能。9个双向开关按照3 3的矩阵进行排列,通过双向开关的导通和关断,三相交流输入中的任意一相可以直接连接至三相交流输出中的任意一相。矩阵式变换器的输入侧还需要三相电感电容(LC)滤波器,以滤除输入电流中由开关动作引起的高频谐波。
由于普通三相-三相矩阵式变换器自身结构的特点,它具有很多优于传统交流电力变换装置的特性,如: Saber高频环节矩阵式变换器的分析与设计:http://www.751com.cn/zidonghua/lunwen_6460.html
------分隔线----------------------------
推荐内容