毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

苏渝变电所及其地区电网规划

时间:2020-03-08 11:35来源:毕业论文
确定发电厂变电站主要设备选择及校验,发电厂及变电站电气主接线设计,初步选出两个可行的电力网络方案,然后对其进行电网潮流计算,综合考虑它们的工程造价电能损耗进而选出

摘要本次设计的题目是“苏渝地区及其周边电网规划”,该设计的内容分为:根据任务书所给数据确定发电厂变电站主要设备选择及校验,发电厂及变电站电气主接线设计,初步选出两个可行的电力网络方案,然后对其进行电网潮流计算,综合考虑它们的工程造价电能损耗进而选出其中最优的方案,对其中最优的方案进行短路电流计算。在设计中对电网所选设备进行简单的继电保护配置,本次设计中计算占据大部分的工作量,因此计算是本次设计的主要内容也是重要部分,根据计算的结果来选择想对象的电气设备,架设导线,以及相关的电路元器件配置,本次设计是本着可靠和安全的原则来完成的。46126
毕业论文关键词:电气主接线;设备选择;潮流计算;短路电流计算等
ABSTRACT
This topic is designed to "Suyu area and its surrounding network planning" ,the contents of the design is pided into :the main power plant substation to the data to determine the selection and calibration equipment , power plants and substations Electric main wiring design according to the mission statement , shortlisted two possible solutions power network and its power flow calculation,considering the power consumption of their project cost and then elect one of the best programs,the best of them short-circuit current calculation scheme. Carried out in the design of the equipment selected grid simple relay protection,this design calculated to occupy most of the workload, so the calculation is the main content of this design is an important part,according to the results of the calculation to select the desired object electrical equipment, erection of wires, and associated circuit components configuration,this design is in line with the principles of safe and reliable to complete.
Keywords :Power network;Electrical equipment selection;wireway;power flow calculation
目  录
第一章 设计说明书    1
1.1确定泰宁和上江的发电机型号、参数    1
1.2 通过运行年费、电能损耗比较确定地区电网接线方案    1
1.3 确定发电厂的电气主接线    3
1.3.1泰宁电气主接线    3
1.4 确定发电厂的主变压器    3
1.4.1 确定泰宁的主变压器    3
1.4.2 确定上江的主变压器    4
1.5短路电流统计表    5
1.6继电保护配置    5
1.6.1保护类型-发电机短路保护:    5
1.6.2保护类型-发电机异常运行保    5
第二章 设计计算书    7
2.1泰宁火电厂上江水电厂主变压器容量的选择    7
2.2地区电网接线方案 1的计算    7
2.3地区电网接线方案1的架空线路型号选择    10
2.3.1泰宁至顺昌变    10
2.3.2泰宁到南丰枢纽变电所    11
2.3.3上江至苏渝变    11
2.3.4 上江经单回路送往南丰枢纽变电所    11
2.4苏渝电网接线方案1校验    12
2.4.3苏渝电网方案1的总投资和年运行费用    17
2.5 区电网接线方案2的计算(环网)    20
2.5.1 地区电网接线方案2的功率平衡计算    20
2.7.2 单相短路电流计算    30
结束语    31
致  谢    32
参考文献    33
附录A    34
第一章 设计说明书
1.1确定泰宁和上江的发电机型号、参数
根据设计任务书拟建一座以500kV与南丰枢纽变电所相连的南丰枢纽变电所,将地区多余电力送往南丰枢纽变电所 苏渝变电所及其地区电网规划:http://www.751com.cn/zidonghua/lunwen_47784.html
------分隔线----------------------------
推荐内容