毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

PLC锅炉过热蒸汽温度控制系统设计+梯形图

时间:2019-04-08 10:10来源:毕业论文
RSLogix500,用梯形图编写实现锅炉控制系统设计,运用PID模块以锅炉出口温度与炉膛温度作为控制变量的串级控制。进行硬件选型,确定好阀门、传感器等后,用组态软件Rsview32设计上位

摘要:介绍了罗克韦尔自动化公司的ControlLogix系统对锅炉控制的应用。此系统中的编程软件RSLogix500,用梯形图编写实现锅炉控制系统设计,运用PID模块以锅炉出口温度与炉膛温度作为控制变量的串级控制。进行硬件选型,确定好阀门、传感器等后,用组态软件Rsview32设计上位机管理系统,画出系统流程图。通过组态软件与PLC连接起来,经过PID模块设置在上位机管理界面进行控制。经过调试,在模拟运行下,此控制系统可以安全、有效的运行管理,通过本文对Rockwell PLC的介绍,可基本了解学习这些软件的使用方法研究;也可了解锅炉的工作方式及对于过热蒸汽的控制方法,加深对自动化工业控制的认识。34391
毕业论文关键词:锅炉;RSLogix500;Rsview32;串级控制
The furnace control system based on Rockwell PLC design
 Abstract: Rockwell automation company ControlLogix system are introduced in the heating furnace control applications.RSLogix500 programming software in this system, written in a ladder diagram to realize heating furnace control system is designed, using PID module to heating furnace outlet temperature and the cascade control of furnace temperature as control variable.For hardware selection, determine the good valves, sensors, etc., using configuration software Rsview32 PC management system design, draw a system flow chart.Through RSlinx connection software to connect the two software, after PID module Settings in PC management interface control.After debugging, under the simulation run, this control system can be safe and effective operation and management, through the introduction to Rockwell PLC, this paper can be a basic understanding of learning the use of the software method research;Also can understand the workings of a heating furnace and control method, to deepen the understanding of industrial automation control.
KeyWords: furnace;RSLogix500;Rsview32;cascade cont
目录
1.    绪论    1
1.1.    锅炉控制系统    1
1.1.1.    我国锅炉过热蒸汽温度控制的目的和意义    1
1.1.2.    国内外研究现状与水平    1
1.1.3.    发展趋势    2
2.    Rockwell PLC软件    3
2.1.    ControlLogix控制器    3
2.1.2.    ControlLogix系统的分类    4
2.2.    RSLogix500编程软件    6
2.2.1.    RSLogix 500软件界面简介    6
2.2.2.    RSLogix 500软件快速入门    7
2.2.3.    关于控制器通讯的几点说明    11
2.3 PID控制    12
2.3.1.  系统分类    12
2.3.2. 控制原理    12
3.    控制系统方案的设计介绍    14
3.1.    串级回路控制方案    14
3.2.    与其他控制方案的对比    15
3.3.    梯形图编程及硬件选型    16
3.4.    上位机管理软件的设计    22
4.    结论    26
致谢    27
参考文献    28
1.    绪论
锅炉是石油化工、发电等工业过程必不可少的重要动力设备,过热蒸汽温度控制是锅炉控制系统不可缺少的重要组成部分,其性能和可靠性已成为保证锅炉安全性和经济性的重要因素。
1.1.    锅炉控制系统
1.1.1.    我国锅炉过热蒸汽温度控制的目的和意义 PLC锅炉过热蒸汽温度控制系统设计+梯形图:http://www.751com.cn/zidonghua/lunwen_31873.html
------分隔线----------------------------
推荐内容