毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

AT89C52槽式聚焦太阳能集热器的设计+CAD图纸

时间:2017-02-20 21:56来源:毕业论文
AT89C52槽式聚焦太阳能集热器的设计包括了聚光集热子系统、换热子系统、发电子系统、蓄热子系统和辅助能源子系统五部分。聚光集热子系统是整个槽式太阳能热发电系统的核心

槽式聚焦太阳能集热器的设计 摘要:在经济高速发展的状态下,随着煤、石油等化石燃料的日益消耗,能源短缺问题不可避免,且传统能源的使用导致环境问题日益严重。太阳能作为可再生能源正受到越来越多的重视。太阳能利用技术中,太阳能热发电技术由于能实现大规模的太阳能利用,得到了迅速的发展。其中槽式太阳能热发电是目前最成熟,成本最低的太阳能热发电技术。整个系统包括了聚光集热子系统、换热子系统、发电子系统、蓄热子系统和辅助能源子系统五部分。聚光集热子系统是整个槽式太阳能热发电系统的核心,也是本文的主要内容。本文根据聚焦型太阳能集热技术知识,通过文献调研,理论计算等方法设计一套技术可行的槽式聚焦太阳能集热器,设计功率达到10kW,实现太阳能的中高温利用。  5883
关键词:  太阳能;槽式聚焦;集热器;热发电
Design of the Parabolic Trough Solar Collector
Abstract:    In the condition of the high-speed economic development, along with the
increasing consumption of fossil fuels such as coal, oil, energy shortage problem is inevitable,
and the use of traditional energy leads to serious environmental problems. Solar energy as a
renewable energy is being more and more attention. Because solar technology, solar thermal
power generation technology can realize large-scale solar energy use, has been rapid
development. The trough type solar thermal power generation is the most mature, the lowest
cost of solar thermal power generation technology. The whole system includes the subsystems
of concentrated heating, heat transfer, power generation subsystem, energy regenerative
subsystem and supporting subsystem of five parts. Concentrated heating subsystem is the core
of the trough type solar thermal power generation system, is also the main content of this
article. According to focus type solar thermal technology, through  the literature research,
theoretical calculation method to design a set of technologies such as feasible groove is
focused on the solar collector, design reaches 10 kW power, realize the high temperature in the
utilization of solar energy.
Keywords:  Solar energy; Parabolic trough; Collector; Thermal power generation 槽式聚焦太阳能集热器的设计
目录
摘要. i
Abstract. i
目录 ii
1  绪论. 1
1.1  太阳能利用技术概述. 1
1.1.1  太阳能开发利用的意义. 1
1.1.2  太阳能的特点.. 1
1.1.3  太阳能利用的基本形式. 2
1.1.4  我国太阳能资源特点.. 3
1.2  太阳能集热器 3
1.2.1  集热器的分类.. 3
1.2.2  国外槽式集热器的研究现状与水平 4
1.2.3  国内槽式集热器的研究现状与水平 5
2  槽式聚焦太阳能集热装置 7
2.1  槽式聚焦集热原理.. 7
2.2  聚光装置.. 7
2.2.1  太阳能反射镜.. 7
2.2.2  反射表面 8
2.2.3  集热器支架.. 9
2.3  线聚焦吸收器..11
2.3.1  直通式金属—玻璃真空集热管.11
2.3.2  集热工质的选择13
2.4  聚光装置的跟踪设计14
2.4.1  跟踪系统控制设计..14
2.4.2  太阳传感器.15
2.4.3  信号处理电路.16
2.4.4  单片机16
2.4.5  步进电机及驱动电路.17
3  槽式聚焦型太阳能集热器的设计计算19
3.1  太阳直射辐射强度.19
3.2  反射镜结构设计.20
3.3  吸收管设计21
3.3.1  导热油的选择及计算.22
3.3.2  槽式聚焦集热器的能量平衡方程25
3.4  设计总结.28
4  结论29 槽式聚焦太阳能集热器的设计 AT89C52槽式聚焦太阳能集热器的设计+CAD图纸:http://www.751com.cn/zidonghua/lunwen_3143.html
------分隔线----------------------------
推荐内容