毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

110KV变电站的设计

时间:2018-12-26 19:34来源:毕业论文
毕业设计的是110kV变电站,主要论述了电力系统工程中变电站部分电气设计一次部分的全过程。通过从安全性、经济性、可靠性等多方面考虑,确定了110kV、10kV对变电站的主接线设计

摘要:变电站是电力系统中不可缺少的一部分,对电网的安全、经济运行起着至关重要的作用,为人们高品质生活提供了有效的供电方案。本毕业设计的是110kV变电站,主要论述了电力系统工程中变电站部分电气设计一次部分的全过程。通过从安全性、经济性、可靠性等多方面考虑,确定了110kV、10kV对变电站的主接线设计,并且设计计算了所用负荷,站用电接线设计,短路电流计算,电气设备动、热稳定校验,主要电气设备型号及参数的确定,并校验电气设备,包括母线、断路器、隔离开关、电压互感器、电流互感器等,并确定配电装置。此外还有运行方式分析,防雷及过电压保护装置的设计,电路一次侧的设计和无功补偿方案设计,较为详细地完成了电力系统中变电站设计。31963
毕业论文关键词:变电站;短路电流;设备选择;变压器
110 kV step-down transformer substation design
Abstract:Substation is an indispensable part of in the power system, safe and economic operation of power grid plays an important role, provides the high quality life for people effective power supply scheme. This graduation design is designed with 110 kv substation as an example, this paper discusses the electric power system transformer substation electrical design a part in the project process. By considering from safety, economy, reliability and other aspects, to determine the 110 kV, 10 kV substation main wiring design, and design calculation of the load, electrical wiring design, short-circuit current calculation, electrical equipment dynamic and thermal stability check, models and parameters determination of the main electrical equipment, and calibration of electrical equipment, including bus, circuit breaker, isolating switch, current transformer, voltage transformer, etc., and determined the distribution equipment. And operation mode analysis, the design of the lightning protection and overvoltage protection, circuit design of primary side and the reactive power compensation scheme design, completed the substation in the power system design in detail.
Key Words:transformer substation;short-circuit current;the selection of equipment;transformer
目  录
1 绪论    1
1.1 110kV变电站研究的目的意义    1
1.2 110kV变电站发展情况    1
1.2.1 变电站中关于高压配电装置的发展情况    2
1.2.2 110kV变电站的应用现状    2
1.3 课题的主要指导思想和问题    2
1.3.1 变电站的电路连接倾向于简化    2
1.3.2 更多的新型一次电气设备    3
1.3.3 变电站的用地面积减少    3
1.3.4 主要问题及要点、难点    3
2 负荷计算    4
2.1 无功功率    4
2.2 无功补偿    4
3 变压器选择    5
3.1 选择原则    5
3.1.1 相数    5
3.1.2 绕组数及结构    5
3.1.3 绕组接线组别确定    6
3.1.4 调压方式    6
3.1.5 冷却方式    7
3.2 主变选择    7
3.2.1 变压器容量    7
3.2.2 变压器形式    7
3.2.3 调压和冷却方式    7
3.2.4过负荷能力校验    7
3.3 本变电站站用变压器的选择    7
4 主接线选择    9
4.1 电气主接线的要求、原则    9
4.1.1 电气主接线的要求    9
4.1.2 电气主接线的原则    10
4.2 电气主接线的选择    11
4.2.1 内桥接线    11 110KV变电站的设计:http://www.751com.cn/zidonghua/lunwen_28305.html
------分隔线----------------------------
推荐内容