毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

1kW大功率ZVS移相全桥开关电源设计+电路图

时间:2018-11-16 10:55来源:毕业论文
设计了一种1kW,50V/20A的ZVS移相全桥开关电源。论文首先介绍了开关电源的几种主要拓扑结构,并在半个周期内对移相全桥ZVS拓扑的工作状况进行了详细分析

摘要结合目前开关电源的发展现状,本文设计了一种1kW,50V/20A的ZVS移相全桥开关电源。论文首先介绍了开关电源的几种主要拓扑结构,并在半个周期内对移相全桥ZVS拓扑的工作状况进行了详细分析。论文其次对开关电源的主电路、控制电路和驱动电路进行了设计。主要工作包括主电路磁性元件的计算与选择;以UC3875为核心、双环控制模式下控制电路的设计;以及利用芯片IR2110驱动MOSFET的驱动电路设计。30292
论文最后通过仿真对相关波形进行了采集。采集的电流波形包括:给定范围内,不同直流输入下,四个MOSFET驱动信号波形、两桥臂中点间电压和原边电流波形;不同负载下开关管上电压电流波形;还有输出电压波形。验证了本电源满足移相PWM以及ZVS条件,且各部分性能满足预期设计要求。
关键词  大功率开关电源  ZVS移相全桥  双环控制
毕业论文设计说明书外文摘要
Title   The Research of High-Power Switching Power Supply
Abstract
According to the current development condition of switching power supply, a 1kW, 50V/20A ZVS phase-shifted full-bridge switching power supply is proposed in this paper. It employs the research methods that combines theoretical analysis with simulation design. Several major topological structures of DC/DC converter are firstly introduced in this paper, and the working principle of ZVS PS-FB DC/DC converter in a half period is analyzed in details. Then the design process of its main circuit, control circuit and driving circuit is put forward, including the calculation and selection of the magnetic elements in the main circuit, and the design of peripheral circuit of chip UC3875 as the core part of control circuit, where a dual-loop control mode is used. On the basis of Saber software, relevant waveform is acquired, verifying the fact that this power supply is zero-voltage turn-on and zero-current turn-off. It has satisfied the design requirements of both its functions and performance.
Keywords  high-power switching power supply  ZVS PS-FB  dual-loop control
目  次
1  引言    1
1.1  开关电源的发展状况    1
1.2  开关电源DC/DC变换器常见拓扑结构    1
1.3  软开关技术    3
1.4  本课题主要工作    5
2  移相全桥ZVS PWM变换器    6
2.1  基本工作原理    6
2.2  工作过程分析    9
3  1kW开关电源的设计    17
3.1  主电路设计    17
3.1.1  主电路电路设计    17
3.1.2  高频变压器    18
3.1.3  输入滤波电容    20
3.1.4  主功率开关管    20
3.1.5  谐振电感    21
3.1.6  输出滤波电感    23
3.1.7  输出滤波电容    24
3.2  控制部分设计    24
3.2.1  控制保护电路设计    24
3.2.2  驱动电路设计    28
4  仿真结果及分析    30
结论    37
致谢    38
参考文献    39
1  引言
1.1  开关电源的发展状况
开关电源目前在现代电力、电子、交通、通信系统、国防等相关方面取得了极为深远的影响[1,2]。自从20世纪50年代,美国宇航局研制出开关电源以来,随着电力电子、软开关、功率因数校正技术等一系列关键技术的发展与进步,开关电源也在工作频率、功率范围等方面不断实现突破,朝着高频化、小型化、模块化、数字化、大功率的方向不断发展[2~4]。 1kW大功率ZVS移相全桥开关电源设计+电路图:http://www.751com.cn/zidonghua/lunwen_25936.html
------分隔线----------------------------
推荐内容