毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

MATLAB电力系统无功优化+文献综述

时间:2018-11-14 22:27来源:毕业论文
在MATLAB中的内点法编制流程,最后基于IEEE14标准测试系统编写出与该系统相对应的无功优化程序,同时,对该系统进行了算例分析,分析结果中体现出了内点法的优化效果与内点法算法

摘要总结了关于无功优化和MATLAB编程基础方面的基本知识。对无功优化的基本内容、国内外研究现状进行了具体的阐述,对比介绍了无功优化的各种算法,分析了无功功率对电力系统的影响。不仅分析了无功优化的具体数学模型,还对电力系统数学模型中的潮流计算方法进行介绍。30235
较为全面的分析了内点法的基本原理,给出了计算流程,详述在MATLAB中的内点法编制流程,最后基于IEEE14标准测试系统编写出与该系统相对应的无功优化程序,同时,对该系统进行了算例分析,分析结果中体现出了内点法的优化效果与内点法算法本身的特点,其收敛效果较好,对优化之后,系统损耗降低了很多。
关键词   MATLAB  无功优化  内点法
毕业论文设计说明书外文摘要
Title    Reactive power optimization for power system                     
Abstract
It summarizes the basic knowledge of reactive power optimization and MATLAB programming foundations.
Reactive power optimization of the basic content and current research has been particularly described. compared to introduce a variety of reactive power optimization algorithm, it analyzes the impact of reactive power on the power system.
Not only does it analyzes the specific mathematical model of reactive power optimization, but also on the power flow calculation method of mathematical models are introduced.
More comprehensive analysis of the basic principles of interior point method and the calculating process are given.The preparation process in MATLAB interior point method are described in detail.Finally standard test system based IEEE14 is writen to the system corresponding reactive power optimization program, at the same time , a numerical example of the system is analyzed and the results reflected the effect of the interior point method optimization algorithm of interior point method own characteristics, its convergence is better, after the system optimization, system loss reduced a lot.
Keywords  MATLAB    Reactive Power Optimization    Interior Point Method
目   次
1  绪论    1
1.1  课题研究的背景与意义    1
1.2  无功优化研究现状    1
1.2.1  常规无功优化算法    1
1.2.2  人工智能算法    3
1.3  本文的主要工作    4
2  无功功率与电力系统    6
2.1  功率因数的概念及意义    6
2.2  无功负荷与无功损耗    7
2.2.1  无功负荷    7
2.2.2  无功损耗    7
2.3  无功电源    7
2.4  无功功率的平衡    8
2.5  无功平衡和电压水平的关系    9
2.6  无功功率对有功网损的影响    9
2.7  本章小节    10
3  无功优化的数学模型    11
3.1  无功优化的通用数学模型    11
3.2  无功优化的目标函数    11
3.3  约束条件    12
3.4  无功优化中的潮流计算    13
3.4.1  牛顿-拉夫逊法    13
3.4.2  PQ分解法    15
3.5  本章小结    17
4  基于内点法的无功优化问题的分析和设计    18
4.1  路径跟踪法    18
4.3  无功优化内点算法的实现    22
4.3.1  数学模型    22 MATLAB电力系统无功优化+文献综述:http://www.751com.cn/zidonghua/lunwen_25858.html
------分隔线----------------------------
推荐内容