毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

石化企业110kV变电站设计+电路图+布置图

时间:2018-10-10 19:44来源:毕业论文
分别确定110kV,35kV及10kV的电气主接线方式。然后,根据负荷资料进行计算,通过计算数据和供电范围选定主变压器。最后,进行最大和最小运行方式下的短路计算

摘要本次设计主要是结合专业知识,根据任务书所提要求,进行了电压等级为110/35/10kV的110kV降压变电站的设计与规划。根据任务书所给出的参数,对负荷的现状与发展趋势进行分析,阐明此变电所建设的必要性。通过分析拟建变电所的简要要求和负荷资料,综合考虑石化企业对供电的安全性、可靠性和经济性的要求,分别确定110kV,35kV及10kV的电气主接线方式。然后,根据负荷资料进行计算,通过计算数据和供电范围选定主变压器。最后,进行最大和最小运行方式下的短路计算,通过短路计算结果和最大持续工作电流的要求,进行高压电器的型号选择,并作出变压器保护和防雷保护。28911
关键词  变电站  输电系统  负荷计算   短路电流
毕业论文设计说明书外文摘要
Title    Design of 110kV substation in petrochemical  enterprise                                       
Abstract
This design mainly is combined with the professional knowledge, according to the specification mentioned requirements, the voltage rating of 110/35/10 kV, 110 kV step-down transformer substation design and planning. According to the specification given parameters, analyze the present situation and the development trend of load, expounds the necessity of the construction of the substation. Through the analysis of the proposed substation brief requirements and load information, comprehensive consideration of petrochemical enterprise safety, reliability and economy of power supply, respectively determine 110 kV, 35 kV and 10 kV electrical main connection mode. Then, according to the load calculation, by calculating the data selected the main transformer and power supply range. Finally, under the maximum and minimum operation mode of short circuit calculation, through the short circuit calculation results and the maximum continuous working current, model selection for high-voltage electrical appliances, and make the transformer protection and lightning protection.
Keywords  substation   transmission system   load calculation short-circuit current
目   次
1  引言 1
1.1  选题背景与意义 1
1.2 设计内容与方法 1
2  电气主接线设计 3
2.1  110kV侧电气主接线 3
2.2  35kV侧电气主接线 4
2.3  10kV侧电气主接线 5
3  主变压器选择 7
3.1  负荷计算7
3.2  主变压器的选择 8
3.3  主变压器中性点运行方式 8
4  变电站短路电流计算 11
4.1  最大运行方式下的短路电流 12
4.2  最小运行方式下的短路电流 17
5  主要电气设备选择23
5.1  电气设备选择条件 23
5.2  断路器及隔离开关的选择 23
5.3  互感器的选择 30
5.4  母线的选择 33
6  配电装置的布置 37
6.1  10kV配电装置 37
6.2  35kV配电装置 37
6.3  110kV配电装置 37
7  变压器保护和防雷保护 38
7.1  变压器保护 38
7.2  防雷保护 39
结论  42
致谢  43
参考文献44
附录A  电气主接线图  45
附录B  变电站总平面布置图  46
附录C  屋内配电装置平面布置图 47
附录D  保护总图 48
1  引言
电力资源是国民经济的命脉。随着近年来我国经济的不断发展,对于电能的需求也水涨船高,国民经济发展与用电短缺的矛盾日渐显著。变电站是输配电系统的一个重要组成部分,起到对电能的电压和电流进行变换、集中和分配的作用。近年,我国电力工业持续健康发展,各地区电力网不断扩大,装机总量及发电量进一步增长,大型机组相继投产,超高压变电站陆续建成,这标志着我国电力工业正在走向一个发展的新时期。高速发展的电力工业对变电站的要求也随之提高,为了满足越来越高的电能需求,对变电站进行优化是当务之急。 石化企业110kV变电站设计+电路图+布置图:http://www.751com.cn/zidonghua/lunwen_23943.html
------分隔线----------------------------
推荐内容