毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

侵蚀燃速测试系统的设计+文献综述

时间:2018-07-09 10:44来源:毕业论文
推进剂试件提前进行阻燃包覆,仅留一面与高温燃气接触,使试件沿燃面法线方向燃烧。透过透明视窗和光学调节系统,固态图像传感器采集到推进剂燃烧产生的火光信号(仅照亮燃气

摘要:本文介绍了一种基于固态图像传感器位移测量系统对固体火箭推进剂侵蚀燃速的测量方法。将待测推进剂试件固定于透明视窗发动机系统(由燃气发生器、透明视窗试验段、喷管三部分组成)中。当发动机点火后,由燃气发生器产生的高温高速气流流入试验段将推进剂试件点燃。推进剂试件提前进行阻燃包覆,仅留一面与高温燃气接触,使试件沿燃面法线方向燃烧。透过透明视窗和光学调节系统,固态图像传感器采集到推进剂燃烧产生的火光信号(仅照亮燃气通道),将其转换为电信号后输出。所输出电信号经过滤波、A/D转换后输入电脑进行处理,进而获得推进剂燃速随时间变化的曲线及侵蚀函数。25474
关键词  固态图像传感器位移测量  固体火箭推进剂  侵蚀燃速   透明视窗发动机系统
毕业论文设计说明书外文摘要
Title    The burning rate of erosion test system design                     
Abstract
This paper introduces a kind of displacement measurement system based on solid-state image sensor displacement measurement system of solid rocket propellant erosive burning rate measurement method.The test propellant specimens were fixed in the transparent window engine system(by the gas generator,the transparent window to the test section,the nozzle is composed of three parts).When the engine ignition, high temperature and high speed airflow generated by the gas generator into the test section will lit propellant samples.Flame retardant coated propellant samples in advance,leaving only one side in contact with the high temperature gas,so that the specimen along the surface normal direction of combustion.Through the transparent window and the optical system,the signal of propellant combustion (only light the gas channel)collect to the solid-state image sensor,solid-state image sensor convert it to electrical signal and output.The output signal after filtering,A/D conversion input into the computer for processing,and then get the propellant burning rate with time and pressure curve and the erosion function.
Keywords  the solid-state image sensor displacement measurement  solid rocket propellant  erosive burning rate  transparent window engine system
目次
1  引言(或绪论)    1
1.1  研究背景及意义    1
1.2  国内外研究现状    1
1.3  本文主要工作    5
2  测试系统的组成及方案设计    6
2.1   测试方案的设计    6
2.2  测试系统的主要组成部分    7
3  线阵CCD图像传感器位移测量系统的设计    11
3.1  线阵CCD相机参数与型号的选配    11
3.2  光学系统的设计    12
4  燃气发生器与试验段发动机测量点压力实时监测系统的设计    16
4.1  压力测量方法简介简介    16
4.2  压力传感器参数与型号的选择    17
5  试验数据采集系统的设计    20
5.1  数据采集卡与计算机接口简介    20
5.2  Camera Link接口类型    21
5.3  数据采集卡    22
5.4  试验点火设计说明    24
6  视窗发动机的设计    28
6.1 燃气发生器结构设计与校核    28
6.2  试验段发动机的结构设计与校核    34
6.3  试验段发动机视窗设计    39
7  试验数据处理    41 侵蚀燃速测试系统的设计+文献综述:http://www.751com.cn/zidonghua/lunwen_19291.html
------分隔线----------------------------
推荐内容