毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

LabVIEW+51单片机冷库无线智能检测系统设计

时间:2018-06-11 21:36来源:毕业论文
以LabVIEW为软件载体,80C51单片机为硬件核心, ZigBee物联网协议作为信息交互方式通过传感元件、变送器数据采集,从而由单片机的软硬件结合实现冷库环境参数的控制,能有效地改善贮藏食品

摘要:冷库条件中的温度和湿度指标是极其重要的参数,不同的物品对于储藏环境温度的要求不尽相同。因此要确保库藏物品在储藏过程中的安全,必须对储存环境温湿度进行全过程的检测记录,而且为了提高数据的可靠性,应该是全自动智能的检测记录,不应有任何的人为因素。因此,科学、可靠的温湿度监测系统是冷库的必备设施。本文以LabVIEW为软件载体,80C51单片机为硬件核心, ZigBee物联网协议作为信息交互方式通过传感元件、变送器数据采集,从而由单片机的软硬件结合实现冷库环境参数的控制,能有效地改善贮藏食品的质量。24082
毕业论文关键词:单片机;物联网协议;传感器; LabVIEW
Cold storage intelligent wireless detect System
Abstract:Cold storage temperature and humidity conditions is extremely important indicator parameters for the different objects different storage temperature requirements. Therefore, to ensure the safety of treasury goods during storage, it is necessary to detect the storage temperature and humidity recording the whole process, and in order to improve the reliability of the data, it should be automatic intelligent detection recording, there should be no human factors. Therefore, scientific, reliable temperature and humidity monitoring system is essential for Cold storage facilities. In this paper, LabVIEW as software carrier, 80C51 microcontroller as core hardware, ZigBee networking protocol as information interactively through the sensing element, the transmitter for data acquisition, which combines hardware and software to achieve by the microcontroller Cold storage environment parameters control, and it can effectively improve the quality of food storage.
KeyWords:microcontroller;networking protocol;Sensor; LabVIEW
目  录
1  绪论.1
1.1 课题背景    1
1.2 环境参数的测量方法    1
1.3环境监测的重要性    2
   1.4 国内外研究现状.2
2  系统总体分析与设计    3
2.1系统的组成和工作原理    4
2.2系统设计方案    4
2.3方案的选择确定    5
3  硬件系统设计    6
3.1硬件模块设计及单片机网络选型    6
3.2对无线网络系统整体的构建    10
3.3传感器的选择    11
3.3.1 DS18B20温度传感器简介    12
3.3.2 DHT-11湿度传感器简介    13
3.4网络节点的设计硬件的设计    15
3.4.1 网络节点硬件设计    15
3.4.2 网络节点软件设计    16
3.5协调器节点设计    17
3.5.1 协调器节点硬件设计    17
3.5.2 协调器节点软件设计    18
3.6监视平台的选择    18
3.7电源模块的设计    19
3.8报警模块的设计    19
4  软件系统设计    20
4.1顶层设计及软件简介    20
4.1.1 LabVIEW及虚拟仪器简介    21
4.1.2 整体设计思路    21
4.2 数据的采集    22
4.2.1传感器与单片机的连接与测试    22
4.2.2通讯方式说明    24
4.2.3 应用ActiveX技术实现串口通信    26
4.2.4 RemoDAQ-8017S数据采集卡的概述    27
4.2.5 RemoDAQ-8017S端子分布    27
4.2.6 报警指示灯的设计    27
4.2.7 温度与电压关系的分析    28
4.2.8 LabVIEW对温度数据的采集程序    29
4.3 VI前面板的设计    29 LabVIEW+51单片机冷库无线智能检测系统设计:http://www.751com.cn/zidonghua/lunwen_17415.html
------分隔线----------------------------
推荐内容