毕业论文

打赏
当前位置: 毕业论文 > 自动化 >

某化纤公司总配变电所(高压配电所带附设车间变电所)及高压配电系统设计

时间:2018-05-21 21:40来源:毕业论文
负荷计算及无功补偿;选择总降压变电所所址和型式;设计总降压变电所的主接线方案;确定变压器数量、容量;计算短路电流和容量;选择并校验一次设备;整定继电保护和自动装置

摘要本设计题目:某化纤公司各车间变电所及其配电系统设计。设计目的:合理解决变电站,高压输电线路,高压配电线路和相应的车间变压器以及低压配电线路之间的关系,使它们能够协调工作,稳定运行,并能满足供用电协议的要求。设计内容:负荷计算及无功补偿;选择总降压变电所所址和型式;设计总降压变电所的主接线方案;确定变压器数量、容量;计算短路电流和容量;选择并校验一次设备;整定继电保护和自动装置;防雷与接地设计。并依照设计要求,使用电气CAD绘制了总降压变电所主接线图、平面布局图、接地装置布置图。本设计均参照供配电设计手册,所有计算结果均符合相关电气设计规范。23129
关键字  负荷计算  短路计算  变压器   继电保护
毕业设计说明书(毕业论文)外文摘要
Title    The Design of 10KV Sbstation for a Chemical Fiber Company
Abstract
The design topic: the design of the workshop substation and distribution system for a chemical  fiber company . Objective: to solve the relationship among substation , high voltage transmission lines, high voltage power distribution lines, corresponding workshops's transformers and low voltage distribution lines, enabling them to work coordinately , operate stably , and  meet the requirements of the agreement for the supply and use of electricity. Design content: load calculation and reactive power compensation; choose the total buck substation location and type; design  the total buck substation's main wiring scheme determine the number of;transformer, calculation of short circuit current and capacity; selection and verification primary equipment; setting of relay protection and automatic device;lightning protection and grounding design. And in accordance with the design requirements,we use electrical CAD drawing a total step-down substation's main wiring diagram, graphic layoutt, grounding device layout. The design conforms to the related codes of the national electricity sector.
Key words  load calculation  short circuit calculation transformer   relay protection
目   录
1  引言    1
1.1  原始资料    1
1.2  设计内容    2
2  负荷计算及无功补偿    3
2.1  负荷计算    3
2.1.1  负荷计算的方法    3
2.1.2  负荷计算公式:    3
2.2  无功补偿    4
2.2.1  采用并联电力电容器补偿    5
2.3  尖峰电流    7
2.3.1  计算公式    7
3  总降压变电所所址和型式的选择    8
3.1  变配电所(车间变电所)所址的选择    8
3.2  变配电所型式的选择    8
3.3  10kv配电变压器台数和容量的选择    8
3.3.1  变压器台数选择    8
3.3.2  变压器容量选择    8
3.3.3  变压器的型式和联接组别    9
3.3.4  各车间变压器选择结果如下表    9
4  主接线方案    10
4.1  主接线的型式和要求    10
4.2  主接线方案的对比及选择    10
5  短路计算    12
5.1  短路计算的公式(标幺值)    12
5.2  绘制短路计算电路图与等效图    12
6  一次设备的选择与校验    15
6.1  选择和校验原则    15
6.1.1  按正常条件选择    15 某化纤公司总配变电所(高压配电所带附设车间变电所)及高压配电系统设计:http://www.751com.cn/zidonghua/lunwen_16066.html
------分隔线----------------------------
推荐内容