毕业论文

打赏
当前位置: 毕业论文 > 研究现状 >

AT89C51单片机交通灯智能控制设计+仿真电路图

时间:2019-07-25 20:11来源:毕业论文
以AT89C51单片机为该系统的控制核心,利用时间芯片DS1302来进行系统自动控制并且将工作模式分为了正常与繁忙两种工作模式,通过按键来调节通行时间,通过交通灯显示来显示红绿灯

摘 要:目前我国交通状况不容乐观,事故频发。尤其    是上下班的交通高峰时段,道路拥堵,普通的交通灯已经不能适应现代交通。因此必须实现交通的的智能控制,减轻交通压力,方便人们的出行。本系统以AT89C51单片机为控制核心与时钟芯片相结合来实现交通信号灯的智能控制,实现了主控系统、按键模块调节通行时间、LED倒计时显示、交通信号灯显示、时钟控制系统等功能。系统以AT89C51单片机为该系统的控制核心,利用时间芯片DS1302来进行系统自动控制并且将工作模式分为了正常与繁忙两种工作模式,通过按键来调节通行时间,通过交通灯显示来显示红绿灯,通过LED倒计时来实现倒计时状况。最后经由PROTEUS软件对交通灯的智能控制部分进行仿真。本系统能更好的处理上下班的高峰时间段的交通问题,实现交通灯的智能控制功能。37550
毕业论文关键词:交通灯 ;智能控制;AT89C51。
Intelligent traffic light
  Abstract:At present, China is not optimistic traffic conditions, frequent accidents. Especially in the peak commuting hours, road congestion, traffic lights have been unable to meet ordinary modern transportation. It is necessary to implement intelligent traffic control, reduce traffic pressure, to facilitate people's travel. This system AT89C51 microcontroller core with a clock chip combining intelligent control traffic lights, to achieve the main control system, a key module regulate the passage of time, LED countdown, traffic lights displays, clock control system functions. AT89C51 SCM system to control the core of this system, using the time to chip DS1302 system and the automatic control mode is pided into two modes of normal and busy, buttons to adjust the passage of time, through the traffic light display to show the traffic light, by LED countdown countdown status is achieved. Finally, the software for the intelligent control via PROTEUS part of the traffic lights simulation. The system can better deal with the traffic problems on peak commuting periods, intelligent control traffic lights.
  Key Words:Traffic light;Intelligent control;AT89C51.
 目    录

摘  要    1
1.交通灯现状及发展趋势    2
1.1 选题背景    2
1.2 选题意义    2
1.3 研究现状及发展前景    3
2. 系统的设计方案    5
2.1 交通灯整体设计需求分析    5
    2.2 设计整体思路    5
2.3 实现过程    5
    2.4 小结    7
3.系统的硬件电路    7
    3.1 系统主体硬件电路构成    8
    3.2 按键装置    9
    3.3 DS1320时间采集模块    10
3.4 辅助器件    10
4.系统软件程序设计    11
    4.1 主体程序    11
    4.2 子程序    13
5.智能交通灯设计实现    15
5.1 实现过程    15
5.2 小结    17
参考文献    18
致  谢    19
交通灯智能控制
1.交通灯现状及发展趋势
1.1选题背景
  为了解决交通问题,常用的方法有两种:一种限制车辆数目的增加来控制需求;二是大量修筑道路基础设施来增加供给【1】。在资源、环境日益紧张的21世纪,面对目前的交通状况,资源与环境之间的关系越来越紧张,我们必须寻求其他的方式来满足日益增长的交通需求。在当前的道路交通环境下,我们很有必要实行有效的交通管制。其中最主要的、最有效的就是交通灯,也就是我们常说的红绿灯。它能够有效的调节车流量与人流量通行状况,方便快捷的调节交通状况。 AT89C51单片机交通灯智能控制设计+仿真电路图:http://www.751com.cn/yanjiu/lunwen_36339.html
------分隔线----------------------------
推荐内容