毕业论文

打赏
当前位置: 毕业论文 > 物理论文 >

甲醇蒸发系统设计

时间:2021-04-09 22:44来源:毕业论文
甲醇蒸发系统的主要目的是产生甲醇和空气的混合气,供给用户燃烧,具有操作简单、占地面积小、甲醇蒸汽循环利用等优点。甲醇蒸发系统主要由燃烧段、蒸发段、送汽段三部分组成

摘要甲醇蒸发系统的主要目的是产生甲醇和空气的混合气,供给用户燃烧,具有操作简单、占地面积小、甲醇蒸汽循环利用等优点。甲醇蒸发系统主要由燃烧段、蒸发段、送汽段三部分组成。启动时,蒸发段中的电加热提供甲醇蒸发所需要的热量,甲醇雾化后与电加热部分充分接触,甲醇蒸发至设定温度。当产生的甲醇蒸汽达到一定量时,停止使用电加热,设备正常运行。

设计中,首先绘制系统原理图,对系统进行燃料燃烧计算和热平衡计算。其次,选取适当规格的水泵、雾化喷嘴、电加热丝、鼓风机、引风机以及连接件,将以上设备正确连接。最后,在蒸发段烟气入口处、蒸发段蒸汽出口处安装热电偶,实时测量烟气和蒸汽的温度。 65194

毕业论文关键词  甲醇  蒸发系统  热平衡计算  燃烧  风机  热电偶

毕业设计说明书(论文)外文摘要

Title    Design of methanol evaporation system           

                                                            

Abstract

The main purpose of methanol evaporation system is producing the methanol steam. The researches and developments of methanol evaporation are reviewed in detail in this paper. 

First,to make use of AutoCAD to draw the structure of the system, and calculated with EES software.Second, to select the appropriate equipment ,including the water pump, nozzle, electric heating wire, air-blast gin and induced draft fan. Third,to install these equipment according to the experimental requirements. Many improvements and valuable results for the designing and developing of the methanol evaporation system are obtained,such as high combustion efficiency,low pollutants emissions and simple operation.

Keywords  methanol  evaporation  water pump  electrical heating  

目   次

1  绪论 1

1.1  甲醇在能源发展中的地位及其理化性质 1

1.2  甲醇作为工质在各领域中的利用现状 2

1.2.2  甲醇蒸发器在柴油机中的应用 2

1.2.3  复合式甲醇蒸发器的发展 2

1.2.4  组合型甲醇蒸发器的发展 3

1.3  本课题研究的主要内容 3

2  蒸发系统的结构、设计原理 5

2.1  甲醇蒸发系统的主要结构及设计原理 5

2.1.1  甲醇蒸发室 6

2.1.2  水泵 6

2.1.3  风机 6

2.1.4  燃烧室 6

2.1.5  甲醇容器 6

2.2  甲醇蒸发系统的设计原理 6

2.3  以水为工质的模拟蒸发系统的结构 9

2.4   蒸发系统的设计原理 10

3  模拟蒸发系统设备选型与装配 14

3.1  雾化喷嘴 14

3.2  水泵 15

3.3  引风机 甲醇蒸发系统设计:http://www.751com.cn/wuli/lunwen_72703.html

------分隔线----------------------------
推荐内容