毕业论文

打赏
当前位置: 毕业论文 > 物理论文 >

含铀废水在有序多孔材料上的吸附行为

时间:2021-03-18 20:06来源:毕业论文
对影响吸附效果的因素进行了研究,通过吸附动态实验,得出了用沸石材料吸附的影响因素和最佳控制条件,确定了影响沸石吸附效果的因素。通过实验结果表明:反应时间、ph值、投加

摘要:近年来国内外已将沸石广泛应用于放射性废水处理。吸附材料的吸附性能与其吸附目标核素有很大的关系,一种吸附剂只对一种或几种放射性核素同时有很高的选择性和吸附容量。沸石是一种天然矿物,在废水处理工艺中经常被用来作为吸附剂,同时还兼有过滤剂和离子交换剂的作用。这种材料与其他无机吸附剂相比,具有较强的吸附能力和净化效果, 本实验采用模拟放射性废水,选择ZSM-5作为吸附剂,进行模拟含铀废水中UO22+吸附实验,对影响吸附效果的因素进行了研究,通过吸附动态实验,得出了用沸石材料吸附的影响因素和最佳控制条件,确定了影响沸石吸附效果的因素。通过实验结果表明:反应时间、ph值、投加量、初始浓度对铀酰离子的吸附率都有一定影响。其中,pH 值是影响铀去除率的主要因素, 在pH=2-3的条件下吸附效果最佳。另外, 铀初始浓度越高, 沸石的吸附量越高,吸附效率越低。同时,考察SBA-15在最佳条件下的吸附效率,对比有序多孔吸附材料的孔径与其吸附性能之间的关联规律。两种吸附剂对铀酰离子的吸附效果对比,SBA-15要优于ZSM-5。在pH为2,温度为25℃,转速为200r/min,反应时间为60min条件下,1000mg的ZSM-5对初始浓度为10mg/L的铀酰溶液的去除率达到64.04%,是吸附的最佳条件。两种材料在最佳条件下的吸附量分别为:ZSM-5:0.6404 mg/g;SBA-15:5.071 mg/g.此外,在ph=1的条件下吸附几乎没有吸附效果可考虑在ph=1的条件下进行脱附。64561

毕业论文关键词  ZSM-5  SBA-15  吸附  放射性废水 

毕业设计说明书(论文)外文摘要

Title   Adsorption behavior of containing uranium wastewater on Ordered porous materials                                      

Abstract:

Zeolites have been widely used to radioactive waste water treatment at home and abroad in recent years,. Adsorbent adsorption adsorption performance target nuclides with a great relationship, an adsorbent only one or a few radionuclides simultaneously have high selectivity and adsorption capacity. Zeolite is a natural mineral, in the wastewater treatment process is often used as an adsorbent, also both filter aid and ion exchange agent. This material compared with other inorganic adsorbents, with a strong adsorption capacity and purifying effect, the present study artificial radioactive waste, choose ZSM-5 as an adsorbent, simulated wastewater containing uranium UO22+ adsorption experiments affecting the adsorption effect factors were studied by dynamic adsorption experiments, the zeolite material of the factors affecting adsorption and optimal control conditions to determine the factors that influence the effect of zeolite. Through experimental results showed that: reaction time, ph value, dosage, initial concentration of uranyl ion adsorption rate has a certain influence. Wherein, pH value is the main factor affecting removal of uranium in the pH = 2-3 optimum adsorption conditions. In addition, the higher the initial concentration of uranium, the higher adsorption capacity of the zeolite, the lower the adsorption efficiency. Meanwhile, the investigation SBA-15 under the best conditions of adsorption efficiency, compared to the aperture of ordered porous adsorbent material and its adsorption properties of the association between the law. Two adsorbents for uranyl ion adsorption effect of contrast, SBA-15 is superior to ZSM-5. At a pH of 2, the temperature is 25 ℃, speed of 200r/min, under the conditions of the reaction time of 60min, 1000mg of the ZSM-5 the initial concentration of 10mg / L solution of uranyl removal rate of 64.04%, the adsorption of the good condition. Two materials the optimum adsorption conditions were: ZSM-5: 0.6404 mg / g; SBA-15: 5.071 mg / g. Moreover, under the conditions of ph = 1 almost no adsorption of the adsorption may consider ph = 1 for desorption conditions. 含铀废水在有序多孔材料上的吸附行为:http://www.751com.cn/wuli/lunwen_71819.html

------分隔线----------------------------
推荐内容