毕业论文

打赏
当前位置: 毕业论文 > 物理论文 >

μVISION高精度三维磁场测量电路设计与实现+源代码

时间:2017-03-18 16:28来源:毕业论文
论文详细地介绍了磁场电路的设计的具体的过程,包括磁探测传感器,A/D元件,CPU的型号的选择,电路图和PCB图的设计等具体的硬件的设计过程,也包括了程序的设计的过程。本课题中

毕业设计说明书(论文)中文摘要  在现代生产生活中,对磁场进行准确的测量是一个重要的课题。本课题通过设计一个高精度三文磁场测量电路,并且完成这一电路的设计和模拟仿真,来满足现代生产与生活对磁场准确测量的要求。 本论文详细地介绍了磁场电路的设计的具体的过程,包括磁探测传感器,A/D元件,CPU的型号的选择,电路图和PCB图的设计等具体的硬件的设计过程,也包括了程序的设计的过程。本课题中充分的利用KEIL公司的μVISION模拟仿真软件来对磁场测量电路进行模拟仿真,在仿真过程中通过RS-485将同一台计算机的两个串口进行连接,实现单机通信。利用μVISION来模拟下位机,并进行模拟数据的输入,数据的采集和传送,而上位机则编制基于VB语言设计的完成命令发送,数据接收与转换的程序。6612
 关键词  单片机  磁场测量  模拟仿真   KEIL μVISION  程序设计
 毕业设计说明书(论文)外文摘要  
Title  The  circuit design of high-precision three-dimensional   magnetic field measurement                        
 Abstract
The accurate measurement of the magnetic field in the modern life is an
important issue. This issue  meets  the requirements of accurate measurement
of the magnetic field, through the circuit design of a high-precision
three-dimensional magnetic field measurement and simulation.
This paper detailed describes circuit design process of the magnetic,
including hardware design process, such as the choice of the magnetic
detection sensor, the A / D components and CPU models, schematic and PCB
design. It also includes the design process of the program. this project
makes full use of the KEIL μVISION to simulate the measurement circuit
of magnetic field. During the simulation, two serial ports of the same
computer connect together through the RS-485 to achieve communication
between single machine. μVISION takes the part as the next crew, inputs
the analog data, collects  data and transmits, while the host computer  sends
commands and receives data.
Keywords    MCU   Magnetic field measurements   program  development     
KEIL μVISION
目   次
 
1   引言(或绪论)  1
1.1   课题的研究背景与意义  1
1.2   课题领域的国内外现状  2
1.3   本论文的主要内容    3
2   磁场测量系统设计   3
2.1   磁场传感器  3
2.2   信号调理   5
2.3   模数转换   6
2.4  主控制器件   8
2.5  通信接口  9
3  磁场测量电路硬件电路设计   10
3.1   磁场传感器的电路设计    10
3.2   A/D 的电路设计 12
3.3  主控制器件的电路设计   13
3.4  单片机与 PC 通信接口的电路设计  15
4  电路软件设计 17
4.1   程序设计概述    17
4.2  下位机程序  17
4.2.1   主程序模块    17
4.2.2  系统的初使化  18
4.2.3   ADC 数据采集子程序模块  20
4.2.4   数据处理子程序模块    21
4.2.5   UART 数据传送子程序模块  22
4.3  上位机程序   24
4.3.1   数据接收与处理    25 μVISION高精度三维磁场测量电路设计与实现+源代码:http://www.751com.cn/wuli/lunwen_4223.html
------分隔线----------------------------
推荐内容