毕业论文

打赏
当前位置: 毕业论文 > 物理论文 >

ANSYS弹塑性梁受冲击时的动力特性研究

时间:2018-03-05 15:55来源:毕业论文
论文先对弹塑性梁进行理论上分析,得出理论上的解,根据梁上不同的载荷作用来验证理论方法,然后用ANSYS数值仿真对弹塑性梁的动力响应进行求解分析,然后将ANSYS模拟得到的结果与

摘要梁在实际工程中的应用十分广泛,但由于梁系问题的求解的复杂性大大加重了设计工作难度。而弹性动力响应分析并不能使材料的性能得到充分的利用,因此,塑性动力响应的研究就显得尤为重要。由于计算机在工程中的广泛应用,可利用有限元理论对梁的塑性动力学响应进行数值模拟研究。
本论文先对弹塑性梁进行理论上分析,得出理论上的解,根据梁上不同的载荷作用来验证理论方法,然后用ANSYS数值仿真对弹塑性梁的动力响应进行求解分析,然后将ANSYS模拟得到的结果与理论方法进行比较分析。19240
关键词    弹塑性  梁  理论模型  有限元  动力响应
毕业论文设计说明书(论文)外文摘要
Title    Study on dynamic properties of elastic-plastic beam subjected to impact
Abstract
Application of beam in practical engineering is very extensive, but because of the complexity of solving the problems of the beam system greatly increased the difficulty of design work. The elastic dynamic analysis does not make the material properties can be fully utilized, therefore, study on the dynamic plastic response is particularly important. Due to the wide application of computer in engineering, but also on the beam plastic dynamic numerical simulation of the response of the finite element theory.
This paper theoretically analysis of elastic-plastic beam, the solution in theory, theoretical methods to verify according to the load beam is different, and then use the ANSYS numerical simulation of elastic-plastic dynamic response analysis of beam were solved, and then the ANSYS simulation results obtained with the method of comparative analysis.
Keywords   elastic-plastic  beam  the theoretical model  finite element  dynamic response
 目 次
1  引言 ……1
1.1  工程背景 .1
1.2  国内外研究现状  ..1
1.3  本文的主要工作…3
2  弹塑性梁的动力响应    …….4
2.1  弹塑性动力学基本模型  ..4
2.2  基本假设  ..5
2.3  对弹塑性梁进行理论上公式的推导  6
3  简支梁的动力响应  ..13
3.1  简支等截面弹塑性梁在突加载荷作用下的动力响应  13
3.2  简支梁在冲击波载荷下的动力响应分析  ..20
3.3  弹塑性梁上加载的其他载荷形式  ..27
4  悬臂梁的动力响应分析  29
5  有限元分析  ..32
5.1  简支弹塑性梁在冲击载荷作用下的Ansys分析  ..33
5.2  悬臂梁在集中载荷作用下的Ansys分析  . 36
5.3  悬臂梁在爆炸载荷作用下的Ansys分析  ..38
6  结论与展望  ..39
6.1  结论  . 40
6.2  展望  . 39
致谢  ..41
参考文献 ..42
 1 引言
1.1 工程背景
   固体力学是研究由固体材料构成的物体结构在受到外部条件影响下(比如有载荷的影响、温度的变化等)的力学响应的一门科学,而对于弹塑性力学,它是属于固体力学里的一门重要的学科,它由研究理想弹性体在弹性阶段的弹性理论和研究可变形固体在塑性阶段的塑性理论组成。它的内容指的是弹塑性物体或结构在受到载荷作用时,研究其发生的应力、应变或位移变化,分析物体或结构的变形和运动规律[1]。
   弹塑性指的是物体本身的一种属性,弹性指的是物体在发生弹性形变后还可以恢复到最初状态的一种性质,塑性指的是物体在受到外力作用时,能够稳定地改变自己的尺寸和形状,并且保持质点间的联系没有被破坏,它不能够恢复到原来状态[2]。 ANSYS弹塑性梁受冲击时的动力特性研究:http://www.751com.cn/wuli/lunwen_10531.html
------分隔线----------------------------
推荐内容