毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

基于MMIC的基础研究

时间:2017-05-21 14:57来源:毕业论文
论文首先分析了各种数字移相器的基本原理和电路拓扑,然后分析了组成移相器的各种无源器件并描述了开关器件 PIN 二极管的模型。使用 Agilent 公司的ADS 软件,设计了 Ka 波段 5 位 MM

单片微波集成电路(monolithic microwave integrated circuit,简称 MMIC)是一种把有源和无源器件制作在同一块半导体基片上的微波电路,其工作频率从1 GHz到l00GHz以上,广泛用于各种不同技术及电路中。单片微波集成电路包括多种功能电路,如低噪声放大器(LNA)、功率放大器、混频器、上变频器、检波器、调制器、压控振荡器、移相器、开关、MMIC 收发前端,甚至整个发射/接受(T/R)组件。 移相器是一种二端口网络,用于提供输入和输出信号之间的相位差,可以由控制信号(直流偏置)来控制。数字移相器在相控阵雷达和数字波束形成系统得到了广泛的应用,相位控制信号加到阵列的各个单元后,使得辐射波束在空间按要求扫描。 本论文首先分析了各种数字移相器的基本原理和电路拓扑,然后分析了组成移相器的各种无源器件并描述了开关器件 PIN 二极管的模型。使用 Agilent 公司的ADS 软件,设计了 Ka 波段 5 位 MMIC 数字移相器,经仿真优化达到了较好的电性能。  8959
关键词  MMIC Ka 波段 数字移相器 PIN二极管 Title   Basic Research based on MMIC technology  
Abstract
Monolithic microwave integrated circuit is a production of the active and
passive components in microwave circuits on a semiconductor substrate,  its
operating frequency from 1 GHz above to l00GHz, widely used in a variety
of different technologies and circuit. Monolithic microwave integrated
circuit includes a circuit of a variety of functions.
The phase shifter is a two  -  port network used to provide the phase
difference between the input and output signals, which can be controlled
by the control signal ( DC bias ) . Digital phase shifters in phased array
radar and digital beam forming system has been widely used, the phase
control signal is added to each unit of the array , making the radiation
beam to scan the space required.
This paper first analyzes the basic principle of a variety of digital phase
shifter circuit topology, and then analyzes the composition of the phase
shifter , passive components and describes the model of the switching
device PIN diode . Agilent's ADS software, is used to design five-digit
Ka-band MMIC phase shifter , and optimizate to achieve better electrical
properties  
Keywords    MMIC  Ka-band  phase-shifter   PIN diode
目次
 
1  引言 1
1.1  MMIC 发展概况 1
1.2  MMIC 的应用 2
1.3  MMIC 移相器的发展概况 4
1.4  本文的主要工作 5
2   MMIC 模型分析 7
2.1  MMIC 中的模型与建模方法7
2.2  无源元件模型分析 8
2.3  PIN 二极管模型12
3   数字移相器概述 18
3.1  数字移相器简介 18
3.2  数字移相器的指标 18
3.3  数字移相器的分类 20
4  数字移相器的仿真 35
4.1  五位 Ka 波段数字移相器的指标35
4 .2  每个相移位的设计与仿真结果  35
4.3  五位级联的仿真结果48
结论   53
致谢   54
参考文献  55
1  引言
1.1    MMIC发展概况
单片微波集成电路(Monolithic Microwave Integrated Circuit,简称 MMIC)是
一种把有源和无源器件制作在同一块半导体基片上的微波电路,其工作频率从 1GHz
到 100GHz 以上,在各种不同技术及电路中被广泛应用 [1]
。MMIC 电路包括多种功能电
路,如低噪声放大器(LNA)、混频器、功率放大器、上变频器、调制器、检波器、压
控振荡器、开关、移相器、MMIC 收发前端,甚至整个发射/接受(T/R)组件。由于MMIC 基于MMIC的基础研究 :http://www.751com.cn/tongxin/lunwen_7510.html
------分隔线----------------------------
推荐内容