毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

STM32用于石油勘探管道检测管道爬行器控制技术研究

时间:2021-03-31 21:18来源:毕业论文
管道检测机器人,是目前国内外检测石油、天然气等管道所采用的主要检测工具。一个完整的管道机器人应该具备移动载体、管道内部环境检测系统、信号传递系统、动力传输系统和控

摘要管道检测机器人,是目前国内外检测石油、天然气等管道所采用的主要检测工具。一个完整的管道机器人应该具备移动载体、管道内部环境检测系统、信号传递系统、动力传输系统和控制系统。本文简单介绍了对油道勘探管道机器人的开发研究。64881

论文的第一章介绍了管道机器人出现的历史背景,国内外研究的技术现状以及管道机器人将来的发展前景。第二章主要介绍了此次项目中管道探测爬行器的硬件设计。介绍了红外接收、单片机STM32、电机驱动芯片L298和编码器的原理。第三章介绍了管道探测爬行器控制系统部分的软件设计。分别说明了PID控制算法、红外编码解码和二相四线步进电机驱动的原理知识。第四章展示了PCB板的布线设计与焊接调试。论文的最后阐述了本论文的结论,总结了整个项目进行的过程,并指出了要进一步进行的工作。

毕业论文关键词  管道机器人    控制系统   L298   单片机STM32F103C8T6

毕业设计说明书(论文)外文摘要

Title  Pipeline inspection for oil exploration pipeline crawler Control Technology

Abstract

Pipe inspection robot, is currently abroad detect oil and natural gas pipelines used in the main test tool. A complete robot should have moving carrier pipe, pipe internal environment detection system, signal transmission system, power transmission and control systems. This paper briefly describes the exploration for oil duct pipe robot research and development.

The first chapter introduces the pipeline robot appeared historical background, technical aspects as well as domestic and international research pipeline robot future development prospects. The second chapter describes the project pipeline crawler detect hardware design. Introduced the infrared receiver, microcontroller STM32, Motor Driver IC L298 and encoder principle. The third chapter introduces crawling pipeline detection part of the software control system design. Description of the PID control algorithm, respectively, infrared codec and two-phase four-wire stepper motor drive principle knowledge. Chapter IV shows the PCB layout design and welding debugging. Finally the paper describes the conclusions of this paper summarizes the entire project process, covering the success of this project as well as inadequacies.

Keywords   Pipeline robot   Control Systems   L298  SCM STM32F103C8T6

目次

1  绪论 1

1.1  国内外管道机器人的研究现状 1

1.2  本课题研究背景及意义 2

1.3  本文的主要工作 3

2  管道探测爬行器的硬件设计 4

2.1 管道探测爬行器的总体结构及硬件控制系统构成 4

2.2  红外接收头技术定义及原理 6

2.3  单片机STM32F103C8T6 8

2.4  电机驱动芯片L298 10

2.5  编码器 12

3  管道探测爬行器的软件设计 14

3.1  管道探测爬行器软件控制系统流程 14

3.2  PID控制算法 15

3.3  红外编码解码 19

3.4  二相四线步进电机驱动 21

4  PCB板布线设计与焊接调试 STM32用于石油勘探管道检测管道爬行器控制技术研究:http://www.751com.cn/tongxin/lunwen_72274.html

------分隔线----------------------------
推荐内容