毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

PCI9812高速数据采集系统的控制与数据传输的软件设计

时间:2021-03-16 20:28来源:毕业论文
阐述了高速数据采集原理,介绍了PCI9812高速数据采集卡的基本组成、特性,其触发方式,应用了其驱动程序。在MATLAB上设计相应的控制程序,对正弦信号进行频谱分析、滤波处理,并展

摘要数据采集是系统获取外界信息的重要手段,高速数据采集技术在军事、航天、航空、铁路、机械通信、气象等诸多行业中应用广泛。而PCI总线性能高、成本低、开放性、独立于处理器、软件透明,是目前极为流行的计算机局部总线。64459

本课题中阐述了高速数据采集原理,介绍了PCI9812高速数据采集卡的基本组成、特性,其触发方式,应用了其驱动程序。在MATLAB上设计相应的控制程序,对正弦信号进行频谱分析、滤波处理,并展示出信号处理的结果。

毕业论文关键词  PCI9812  高速数据采集  软件控制  MATLAB

 毕业设计说明书(论文)外文摘要

Title    Designing Software To Control High-speed Data Acquisition System And Data Transmission         

Abstract Data acquisition is an important way for system to access to outside information, high-speed data acquisition technology is using widely in military, aerospace, aviation, railway, machinery, communication, weather and other industries. The PCI bus is high performance, low cost, open, independent of the processor and software-transparent, it is a very popular computer local bus.

This topic expounds the principles of high speed data acquisition, introduces the PCI9812 basic composition and properties of high speed data acquisition card, the trigger mode, the application of the driver. Designing corresponding control program in the MATLAB to spectral analysis and filter the collected signal , finally the result of signal processing was showed.

Keywords  PCI9812  High-speed data acquisition  Software control  MATLAB

目  录

1  绪论 1

1.1  选题背景及意义 1

1.2  发展现状与趋势 2

1.3  本文主要内容和章节安排 4

2  高速数据采集 4

2.1  数据采集系统 4

2.2  数据采集系统的构成 5

2.3  现代数据采集系统的主要特点 6

2.4  数据采集系统的主要功能 7

3  高速数据采集卡PCI9812 7

3.1  PCI9812的基本组成 8

3.2  PCI9812的主要参数 10

3.3  A/D转换 11

3.4  数据流分析 13

3.5  PCI9812的触发 14

4.1  数据采集过程 16

4.2  初始化PCI9812 17

4.3  采集数据并进行处理 17

4.3.1  模拟输入采集方式 17

4.3.2  软件采集模块封装 18

4.3.3  频谱分析 22

4.3.4  数字滤波模块 27

结 论 28

致 谢 29

参考文献 30

第一章  绪  论

1.1  选题背景及意义

随着计算机的广泛应用和微电子学的高度发展,数字系统已被广泛地应用于国民经济、国防建设与科学实验的各个领域。和模拟系统相比,数字系统有精度高、稳定性好等一系列优点,但是数字系统只能处理离散的数字信号。外部世界各种被检测量,如温度、压力、位移、流量、角度、位置等,通过相应的各种类型的传感器转换成便于进一步处理的物理量(一般为电压、电流、电阻或电脉冲等信号)。只有一部分传感器可以将外部世界的被检测量直接转换为数字信号或开关信号(是一种只有0、1两个状态的数字信号)。大部分传感器输出的仍是电压或电流等模拟信号,所以往往需要将这些模拟信号转换为便于处理和存储的数字信号。论文网 PCI9812高速数据采集系统的控制与数据传输的软件设计:http://www.751com.cn/tongxin/lunwen_71634.html

------分隔线----------------------------
推荐内容