毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

基于虚拟仪器技术太阳能自动跟踪系统的研究与实现

时间:2017-05-03 21:48来源:毕业论文
太阳能自动跟踪系统是基于虚拟仪器软件,将光电跟踪方式和时间跟踪方式用一种新的方法(两种方式同时采用,而非相互切换)结合在一起,使系统运行更加稳定,便于维护和安装

摘要本文的主要研究内容是太阳自动跟踪装置控制系统的研究,在前人研究的基础上作了进一步的开发,吸取了前人研究的精华,补充了前人研究的不足。本系统是基于虚拟仪器软件,将光电跟踪方式和时间跟踪方式用一种新的方法(两种方式同时采用,而非相互切换)结合在一起,使系统运行更加稳定,便于文护和安装,提高了系统的追踪精度、可靠性,降低了整个装置的整体成本。本系统能够全天候自动工作,在晴天光线足够强的情况下,系统会根据时间跟踪和由光电跟踪系统产生的轨迹调整量进行跟踪,提高了跟踪精度,避免了由于环境干扰在只采用光电跟踪时会发生紊乱的问题。于光电跟踪的修正作用,系统的安装精度要求不高,降低了装置的安装成本,便于装置的普及和应用。8115
关键词 虚拟仪器  自动跟踪  时间跟踪  光电跟踪
毕业设计说明书(论文)外文摘要
Title     The research of solar energy automatic tracking     system based on virtual instrument                     
Abstract
The main contents of this paper is the study of the sun automatic tracking device control system and made on the basis of previous research for further development. I have drew on the essence of the previous studies and supplement the lack of previous studies. This system is based virtual instrument software and uses a new method of combine optical tracking and time tracking mode (using the two methods at the same time, rather than interchanged) in order to make the system more stable, easier to maintain and install, improve tracking accuracy and reliability and reducing the overall cost of the entire device. The system can weather work automatically. In the case of that sunny light is strong enough , the system will track orbit which generated by time tracking and the optical tracking system. It will improve the tracking accuracy, avoid the disorders which would occur in the case of only using the optical tracking. System installation accuracy is not required, which reduces the cost of installation of the device. It is easy for the popularization and application of the device.
Keywords:Virtual Instrument, Automatic tracking, Time tracking,  Electro-optical tracking
目录
1 绪论1
1.1 课题研究的意义1
1.2 应用背景(国内外研究现状)2
1.3 虚拟仪器发展现状与前景3
1.5 论文主要内容和编排4
2 太阳能跟踪方法的研究4
2.1时间跟踪 4
2.2光电跟踪 8
2.3 时间跟踪与光电跟踪结合9
3总体方案设计10
3.1太阳能跟踪系统设计方案的类型10
  3.2太阳能自动跟踪系统的结构图11
  3.3软件平台labview的介绍11
4系统的硬件设计12
4.1光敏器件12
4.2太阳光检测电路13
4.3数据采集卡14
4.4驱动电机16
4.5太阳能电池板17
5系统的软件设计19
5.1 labview软件开发平台的介绍19
5.2系统的整体程序图‧22
5.3时间跟踪的程序设计24
5.4光电跟踪的程序设计27
5.5光强显示和角度存储程序的设计30
5.6调试模式的设计31
5.7夜间复位系统的设计32
5.8前面板的设计34
  6太阳能自动跟踪系统的测试35
6.1太阳能自动跟踪系统测试过程35
6.2太阳能自动跟踪系统测试界面36
  结论37
致谢38
参考文献39
1  绪论
   本课题研究一种基于虚拟仪器的太阳光线自动跟踪装置,该装置能自动跟踪太阳光线的运动,保证太阳能设备的能量转换部分所在平面始终与太阳光线垂直,提高设备的能量利用率。 基于虚拟仪器技术太阳能自动跟踪系统的研究与实现:http://www.751com.cn/tongxin/lunwen_6330.html
------分隔线----------------------------
推荐内容